Catalogs >
Omniflex >
Model C2360B-32-0 Teleterm M2R-2

Model C2360B-32-0 Teleterm M2R-2
7Pages

Catalog excerpts

TELETERM M2R Series Programmable RTU’s Model C2360B-3X Teleterm RTU’s with integrated communication ports. DATASHEET • 12 Configurable Inputs and Outputs • Wide choice of communications options • ISaGRAF 61131-3 Programmable • SD Card Logging • Low power operation • 10/100 Ethernet option FEATURES • Integral Real-Time Clock with Battery Backup 12 Inputs and/or Outputs (Analog or Digital) Programmable for a wide range of applications. Wide operating temperature range SD Memory Card Slot for off-line data logging. Compact size for tight spaces On-board temperature sensor and voltage monitor Convenient DIN Rail mounting OVERVIEW The TELETERM M2 series is a state-of-the-art RTU range designed to expand the possibilities of remote monitoring and control by providing a cost effective platform with a wide range of features. Communications options include licence-free Radio in a number frequency bands ie. Range of up to 4km on 2.4GHz operating band, 20km on 868MHz operating band, and 40km on 900MHz operating band (with hi-gain antenna) . The TELETERM M2 comes with 12 universal I/O that can be configured for analogue or digital input or output according to your needs. The on board RS232/485 port can be used to acquire data from other third party devices using either the Modbus protocol, or by downloading a custom software protocol “plug-in”. This feature allows a wide variety of third party devices to be supported. The low power consumption of the the Teleterm M2 makes it suitable for use in solar powered and battery powered applications. The Teleterm M2 series can also be programmed in ISaGraf, an industry standard programming environment for all five IEC61131-3 programming languages, providing the ability to do local control, and custom logic. The Teleterm M2 also incorporates an SD memory card slot to support local data logging. Typical applications for the M2 include: • Energy Management and Remote Meter Reading. Environmental Monitoring Remote Site Monitoring Utilities monitoring Pump Stop and Start Control Reservoir Pump Integrated Control Last Mile Communications Interface Message Board Wireless Connection from Plant In Plant Cable Saving Stay in touch – Take control with the Teleterm M2 Series from Omniflex. Copyright Omniflex ♦ Subject to change without notice

Open the catalog to page 1

TELETERM M2R Series Programmable RTU’s Model C2360B-3X Teleterm RTU’s with integrated communication ports. General Layout Optional 10/100 Ethernet Port Programming Port SD Memory Card Slot Optional SIM card under cover Press card in to release. Push before removing card. Only remove card when light is off. Diagnostic Lights (LEDs) SD Card Eject Button Mechanical Dimensions 109,5 Height including serial cable Copyright Omniflex ♦ Subject to change without notice

Open the catalog to page 2

TELETERM M2R Series Programmable RTU’s Model C2360B-3X Teleterm RTU’s with integrated communication ports. Communication Functions by Model Product Name Order Code 868MHz 920MHz 315mW 1W Radio Radio Port Port NOTES: 1. The M2R version is available in a number radio band options to comply with different country regulations. Please ensure that the correct unit is specified for your application. 2. 2.4GHz Band is suitable for use all countries. 3. 920MHz Band is suitable for use in USA, Australia and New Zealand. 4. 868MHz Band is suitable for use in Europe, and South Africa. Copyright...

Open the catalog to page 3

TELETERM M2R Series Programmable RTU’s Model C2360B-3X Teleterm RTU’s with integrated communication ports. Input/Output Configurable Options The M2Ris equipped with 12 versatile input/output points (I/O points or IOP’s). Each I/O point can be individually configured from the options given in the following table: I/O Point Digital Input Analogue Input Digital Output Analogue Output Note 1: See the “Specifications” section of this document for detailed specifications of each I/O point option. Note 2: All 0-30V analogue inputs have increased resolution over the range 0-6V (equivalent to the...

Open the catalog to page 4

TELETERM M2R Series Programmable RTU’s Model C2360B-3X Teleterm RTU’s with integrated communication ports. SPECIFICATIONS COMMON TO ALL MODELS Input/Outputs All M2 RTU’s have 12 Input/Output Points (IOP configurable in software as analogue or digital, inputs or outputs. 0-30Vdc (software configurable to smaller ranges such as 1-5Volts) (See the table above for a matrix of available functions on each I/O Point.) < 0.15% of reading +6mV from 0 to 5.5V < 0.15% of reading +30mV from 5.5 to 30V 6mV from 0 to 5.5 Volts nominal (10 bits) 33mV from 5.5 to 30Volts nominal (10 bits) As a Digital...

Open the catalog to page 5

TELETERM M2R Series Programmable RTU’s Model C2360B-3X Teleterm RTU’s with integrated communication ports. Front Panel Serial Port ( available on all models ) Type Asynchronous serial port Supports the following protocols as standard: • Conet/s • Modbus ASCII (Master or Slave) • Modbus RTU (Master or Slave). • Other protocols written in the EventForth programming language may be downloaded. 300 – 38,400 baud. Baud Rate Maximum cable length Selected by the wiring to the DB9 connector Do not connect Rx Data (In) Tx Data (Out) Do not connect Ground Do not connect RTS (Out) CTS (In) Do not...

Open the catalog to page 6

TELETERM M2R Series Programmable RTU’s Model C2360B-3X Teleterm RTU’s with integrated communication ports. Ordering Information ORDER CODE Teleterm M2R Programmable RTU equipped with integral 920MHz 100mW FHSS licence-free radio network port (USA, Australia, NZ only) Teleterm M2R Programmable RTU equipped with integral 868MHz FHSS licence-free radio network port (UK, South Africa & European aligned countries) Teleterm M2R Programmable RTU equipped with integral 900MHz 1W FHSS licence-free radio network port (USA, Australia, NZ only) Teleterm M2S Programmable RTU equipped with second and...

Open the catalog to page 7