*mydirectindustry

Catalogs
Omniflex
Model C2166A PT-2000 24Vdc

Model C2166A PT-2000 24Vdc

Product catalog summary

Overview
The POWERTERM range of power supplies, including models PT1K, PT2000, and PT5000, is designed for industrial instrumentation applications. These power supplies offer universal AC input, high reliability, and compliance with international safety standards. They are suitable for DIN rail or surface mounting and utilize switch-mode supply technology to enhance cost-effectiveness and reliability.

Specifications

Input: Universal AC input voltage range of 85-264Vac and DC input range with derating below 110Vdc. Surge protection and internal safety fuses are included.
Output: Available in 12V or 24V with maximum continuous output currents of 1A, 2A, or 5A depending on the model. Features include short circuit protection and over-temperature shutdown.
Environmental: Operating temperature range is 0-50°C at full load, with storage temperatures from -25 to 75°C. The design life at 50°C full load is 50,000 hours.

Models and Ordering Information

PT1K: 24W or 12W output, 1A current, 50mm width, no PSU OK output.
PT2000: 50W or 25W output, 2A current, 70mm width, no PSU OK output.
PT5000: 120W or 60W output, 5A current, 150mm width, includes PSU OK output.

Electrical Connections
Detailed connection diagrams are provided for each model, indicating mains input and DC output terminals. The PT5000 model includes a power fail output contact for system monitoring.

Compliance and Safety
The power supplies conform to standards such as EN55011, EN50081-2, EN50082-2, IEC950, and EN60950, ensuring safety and electromagnetic interference compliance.

Catalog excerpts

Universal ac input 100-240Vac on all models 100-250Vdc input supply available on some models DIN Rail Mounting CE Approved High reliability design for industrial grade applications Conforms to EN55011, EN50081-2, EN50082-2, IEC950andEN60950 Removable terminal blocks on most models for easy system maintenance. Enclosed housings with protected terminals to allow safe mounting in serviceable locations Compact size for better space efficiency Under/overvoltage protection as standard with "PSUOK"output available on some models for system monitoring and parallel operation. OVERVIEW The POWERTERM range of 12/24Vdc power supplies is specifically designed for industrial instrumentation applications. Use of carefully selected long-life components and conservative design parameters ensure increased reliability even in harsh conditions. Forming part of the OMNITERM range of industrial instrumentation, the POWERTERM Series is designed to be DIN rail or surface mounted. This second-generation family of power supplies uses the latest switch-mode supply technology to reduce cost, increase reliability and meet international safety and compatibility norms. Quick Selection Guide and Ordering Information Model Power Rating Module Width Order Code Replaces Model Copyright Omniflex ♦ Subject to change without notice Solutions by Design http://www.omniflex.com

Open the catalog to page 1

SPECIFICATIONS MODEL INPUT ac Input Voltage Range dc Input Voltage Range (derate 1%/Volt below 110Vdc) Input Protection Input Current at 100% load 85-132Vac or 170-264Vac dependent upon the input terminals wired. Surge protected plus internal safety fuse <0.25A rms at 115Vac <0.12A rms at 230Vac Switch-on Inrush Current at 264Vac OUTPUT Output Voltage at full load (dependent upon model selected) Maximum Continuous Output Current Overload Protection Short Circuit Proof with over temperature shutdown Internal adjustment range (service personnel) Output Voltage Ripple at full load Load Regulation...

Open the catalog to page 2

ELECTRICAL CONNECTIONS Mains Input Copyright Omniflex ♦ Subject to change without notice Mains Input Power Fail Output Contact Mains Input Solutions by Design http://www.omniflex.com

Open the catalog to page 3

All Omniflex catalogs and technical brochures

Archived catalogs

OMNIFLEX Product Shortform Catalogue
8 Pages