Eccentric self-locking clamping devices "CAM SYSTEM"

Product catalog summary

Overview
The document describes the CAM SYSTEM, a patented eccentric self-locking clamping device designed for easily clamping workpieces of varied forms. It provides double locking (axial and radial) using an eccentric and propeller principle, with a clamping force of 4,000 kg for the 't' system and 2,000 kg for the 's' system. The system is compact and includes cap head bolts and T-nuts for compatibility with machine tool cross slots.

Specifications
The CAM SYSTEM is available in different configurations: 't', 'g', and 's'. Each system has specific components and displacement measurements:

CAM SYSTEM 't': Includes 4 CAM SYSTEM 't', 4 fixed blocks, 8 pairs of T-nuts with screws, and a key, all packed in a wooden case. Displacement is 3 mm.
CAM SYSTEM 'g': Supplied singly according to customer specifications, with a displacement of 3 mm.
CAM SYSTEM 's': Includes 4 CAM SYSTEM 's', 4 fixed blocks, 6 pairs of T-nuts with screws, and a key, all packed in a wooden case. Displacement is 4 mm.

Components
Each CAM SYSTEM configuration includes:

Screw
Central element
Eccentric element
Clamping element
T-nuts
Fixed block

Performance
The document includes a graph showing the vertical and horizontal forces for both 't' and 's' systems, measured in kg x 1,000. The graph illustrates the force distribution and performance characteristics of the clamping devices.

Catalog excerpts

Eccentric self-locking clamping devices

Open the catalog to page 1

eccentric self-locking clamping devices The CAM SYSTEM has been developed and patented to easily clamp workpieces with varied forms. This compact product enables double locking (Axial and Radial) using the eccentric and propeller principle. With a rotation of approximately 15°, contact is made with the workpiece with the complete clamping face of the CAM. The CAM SYSTEM clamps the workpiece with a clamping force of 4,000 kg (t) and 2,000 kg (s). CAM SYSTEM is supplied with both cap heads bolts and T-nuts to suit the particular machine tool cross slots. CAM SYSTEM “g” is supplied singly, to the...

Open the catalog to page 2

Eccentric self-locking clamping devices "CAM SYSTEM"-3

eccentric self locking clamping devices Set CAM SYSTEM “t” complete with: N. 4 CAM SYSTEM “t” N. 4 fixed block CAM SYSTEM ‘t’ N. 8 pair of T-nuts with screw N. 1 key for CAM SYSTEM ‘t’ wooden packing case

Open the catalog to page 3

Eccentric self-locking clamping devices "CAM SYSTEM"-4

eccentric self-locking clamping devices CAM SYSTEM “t” single Fixed block CAM SYSTEM “t” Pair of T-nuts with screw CAM SYSTEM “t”

Open the catalog to page 4

Eccentric self-locking clamping devices "CAM SYSTEM"-5

eccentric self locking clamping devices Fixed block CAM SYSTEM “g” dimensions A,B,I must be specified when ordering

Open the catalog to page 5

Eccentric self-locking clamping devices "CAM SYSTEM"-6

eccentric self-locking clamping devices Set Cam SYSTEM “s” complete with: N. 4 CAM SYSTEM “s” N. 4 fixed block CAM SYSTEM “s” N. 6 pair of T-nuts with screw N. 1 Key for CAM SYSTEM “s” wooden packing case

Open the catalog to page 6