Clamping vise with mechanical/mechanical clamping force multiplier NCN - 20 Pages

Add to MyDirectIndustry favorites
Clamping vise with mechanical/mechanical clamping force multiplier NCN

Catalog excerpts

Clamping vise with mechanical/mechanical clamping force multiplier NCN pag. 9.2. 2 Modular vertical system Modular parallels/quick change

 Open the catalog to page 1

clamping vise with mechanical/mechanical clamping force multiplier NCN-s, designed and manufactured by OML, is the new generation of vises with a mechanical/mechanical clamping force multiplier. This vise features a vibration absorbing body and hardened steel jaws. The most important “Features” are: Quick change of parallels and jaws with our CLAK SYSTEM (see pag. 9.2.14) The spindle is completely sealed against entry by chips Mechanical/mechanical clamping force multiplier patented (Knuckle-joint device) Two control knobs. One for the approach at the workpiece; and one for the clamping...

 Open the catalog to page 2

clamping vise with mechanical/mechanical clamping force multiplier Clamping vise NCN-s complete with crank-lever; work-stop; 2 eye-bolts; wooden packing case.

 Open the catalog to page 3

clamping vise with mechanical/mechanical clamping force multiplier and pull-down jaws NCN-d, designed and manufactured by OML, is the new generation of vises with a mechanical/mechanical clamping force multiplier. This vise features a vibration absorbing body and hardened steel jaws. The most important “Features” are: Quick change of parallels and jaws with our CLAK SYSTEM (see pag. 9.2.14) Two control knobs. One for the approach at the workpiece; and one for the clamping force selection: 1 ton; 2 tons; 3 tons; 4 tons. The spindle is completely sealed against entry by chips Standard...

 Open the catalog to page 4

clamping vise with mechanical/mechanical clamping force multiplier and pull-down jaws Clamping vise NCN-d complete with crank-lever; work-stop; 2 eye-bolts; wooden packing case.

 Open the catalog to page 5

clamping vise with mechanical/mechanical clamping force multiplier with square-block jaws NCN-k, designed and manufactured by OML, is the new generation of vises with a mechanical/mechanical clamping force multiplier. This vise features a vibration absorbing body and hardened steel jaws. The most important “Features” are: Quick change of parallels and jaws with our CLAK SYSTEM (see pag. 9.2.14) Mechanical/mechanical clamping force multiplier patented (Knuckle-joint device) The spindle is completely sealed against entry by chips Two control knobs. One for the approach at the workpiece; and...

 Open the catalog to page 6

clamping vise with mechanical/mechanical clamping force multiplier with square-block jaws Clamping vise NCN-k complete with crank-lever; work-stop; 2 eye-bolts; wooden packing case.

 Open the catalog to page 7

modular vertical system for 4 vises Configuration and overall dimensions for NCN-s

 Open the catalog to page 8

modular vertical system for 4 vises Configuration and overall dimensions for NCN-d Configuration and overall dimensions for NCN-k

 Open the catalog to page 9

modular vertical system for 2 vises Configuration and overall dimensions for NCN-s

 Open the catalog to page 10

modular vertical system for 2 vises Configuration and overall dimensions for NCN-d Configuration and overall dimensions for NCN-k

 Open the catalog to page 11

modular parallels/quick change This new patented system allows the quick change of parallels, angular paralles, V-jaws, soft jaws for any type of workpieces. Benefits: • Reduce downtime and set-up time • Elimination of clamps and locks thanks to the patented self locking system • Increase the accuracy of finished parts and reduce scrap All components are case hardened and precision ground. The CLAK can be used for the complete NCN range: NCN-s/d/k. CLAK SYSTEM

 Open the catalog to page 13

modular parallels/quick change Set of 6 pairs of parallels C Pair of aluminum jaws C Pair of soft steel jaws C

 Open the catalog to page 14

accessories for NCN Extension element Application examples

 Open the catalog to page 15

Pair of smooth jaws Cod. Pair of grooved jaws Cod. Pair of positioning keys T h6

 Open the catalog to page 16

Fixed jaw “ L” type for NCN-s Moveable jaw “ L” type for NCN-s Fixed support with pull-down jaw for NCN-d Moveable support with pull-down jaw for NCN-d

 Open the catalog to page 18

Fixed square block jaw for

 Open the catalog to page 19

L--i-n--r L-i-zi-r

 Open the catalog to page 20

All OML catalogs and technical brochures

  1. Twin Vices

    32 Pages

  2. FAST CLAMPS

    108 Pages

  3. STATIC CHUCKS

    16 Pages

  4. VP-N

    12 Pages

  5. GENIUS

    12 Pages

  6. SinterGrip

    20 Pages

  7. FAST-CLAMPS

    109 Pages

  8. TOUCHDEX

    20 Pages

  9. GENIU5

    12 Pages

Archived catalogs