Series PGP
Series PGP
The document outlines the specifications for pneumatic 2-finger parallel grippers, Series PGP. Key specifications include an operating pressure range of 2-8 bar, repeatability varying by model, and an operating temperature range from -10°C to 90°C, extendable to 130°C upon request. The grippers operate on a wedge-hook kinematics principle, with housing made from high tensile hard-coated aluminum alloy and functional parts from treated ground steel. They require no maintenance for the first 1.5 million cycles and are rated IP 40 for dust protection.
This section details various models (PGP 40 to PGP 300) with specific gripping forces at 6 bar, air consumption, and gripper weight. It also specifies recommended part weights for transport and maximum finger lengths for each model.
Optional features include top jaw blanks and quick-change jaw systems. Special versions offer precision, high-temperature, anti-corrosion, force intensified, and dust-protection options. A mechanical gripping force maintenance device is available to ensure minimum gripping force during pressure drops.
The TDM version enhances gripping forces with a second piston, achieving full force after several hundred cycles.
The document provides comprehensive guidelines for the TY quick-change jaw system and PGP grippers, including dimensions, forces, and torques for various models, along with usage and maintenance instructions.
The TY quick-change jaw system allows rapid manual exchange of top jaws, requiring an adapter and base for each jaw. It features a form-fit locking mechanism and maintains height evenness and replacement accuracy within specified tolerances.
Emphasizes keeping locking surfaces free of grease and oil and adhering to maximum permissible finger lengths and load values for optimal gripper performance.
The JUS series offers tool-free adjustment and clamping of top jaws, made from anodized aluminum alloy, available in sizes JUS 40 to JUS 200.
Users should throttle air pressure if maximum finger weight is exceeded to prevent damage. Each kit includes a top jaw and screws made from high tensile aluminum alloy.
Contact information for OMIL, the manufacturer, is provided, emphasizing adherence to guidelines for efficiency and safety.
Catalog excerpts
www.omil.it info@ (dmil.it Gripping systems and automation Technical data Technische Daten - Range of operating pressure: 2-8 bar - Repeatability PGP 40... 160 0.01 mm; PGP 200 0.02 mm; PGP 240. 300 0.05 mm over 100 cycles - Operating temperature: from -10°C to 90°C; version up to 130°C upon request - Operating principle: wedge-hook kinematics - Housing material: high tensile hard-coated aluminium alloy, hard-anodized - Material of functional parts: treated ground steel - Actuation: pneumatic, with filtered compressed air (10 pm): dry, lubricated or non-lubricated (DIN ISO 8573-1: 644) - Maintenance: no maintenance required for the first 1.5 million cycles - Suitable for internal/external gripping - Wiederholgenauigkeit: PGP 40.160 0.01 mm; PGP 200 0.02 mm; PGP 240. 300 0.05 mm uber 100 Schaltspiele - Wirkprinzip: Keilhakenprinzip Zwangsgefuhrt uber schrage Ebene - Material: Gehause aus hochfester Aluminiumlegierung harteloxiert, Funktionsteile aus gehartetem Stahl - Betatigung: pneumatish, uber gefilterte Druckluft (10 pm): trocken, geolt oder ungeolt (DIN ISO 8573-1: 644) - Fur Innen- und AuBengreifen geeignet QMiL Via A. De Francisco 128- Tel. +39.011.821.11.81 - Fax +39.011.895.44.62 - 10036 Settimo T.se (To) - Italy/
Open the catalog to page 1
Gripping Gripping systems systems and automation and automation www.omil.it www.omil.it [email protected] [email protected] 2-finger parallel gripper, pneumatic - series PGP 2-Finger-Parallelgreifer, pneumatisch - Typ PGP Via A. Via De Francisco A. De Francisco 128 - Tel. 128+39.011.821.11.81 - Tel. +39.011.821.11.81 - Fax +39.011.895.44.62 - Fax +39.011.895.44.62 - 10036- 10036 Settimo Settimo T.se (To) T.se - Italy (To) - Italy
Open the catalog to page 2
www.omil.it info@ (dmil.it Gripping systems and automation QMiL Via A. De Francisco 128- Tel. +-39.011.8211.11.81 - Fax +-39.011.895.44.62 - 10036 Settimo T.se (To) - Italy/
Open the catalog to page 3
Gripping systems and automation 2-finger parallel gripper, pneumatic - series PGP 2-Finger-Parallelgreifer, pneumatisch - Typ PGP Type Minimum operating pressure 2 bar, max 8 bar. Betriebsdruck mindestens 2 bar, max 8 bar. Closing and opening times are purely the times that the base jaws are in motion. Valve switching times, hose filling times, and PLC/CNC reaction times, switching sensor times are not included in the above times and must be taken into consideration when determining cycle times. SchlieB- und Offnungszeiten: sind reine Bewegungszeiten der Grundbacken bzw. - finger. Ventilschaltzeiten,...
Open the catalog to page 4
www.omil.it info@ (dmil.it Gripping systems and automation OPTIONALS / ZUBEHOR - Top jaw Blanks / Aufsatzbackenrohlinge: Version TY-CC - Quick-change Jaw System / Backenschnellwechselsysteme - Version TY - Universal intermediate jaw/ Universelle Zwischenbacke - Version JUS - Precision version / Prazisions -Version - Code HP ± 0,025 - Anti-corrosion / Korrosionsschutz - Code AC - Force intensified / Kraftverstarkungs - CodeTDM - Dust-protection / Staubdicht-Version - Code DP - Version standard / Standard Version - without code - Version "Z" with "G" ± 0.015 to clamping center / zum Spannzentrum...
Open the catalog to page 5
www.omil.it www.omil.it [email protected] [email protected] Gripping Gripping systems systems and automation and automation 2-finger parallel gripper, pneumatic - series PGP 2-Finger-Parallelgreifer, pneumatisch - Typ PGP Device to maintenance the gripping force - Code MC (closing) MA (opening) Greifkrafterhaltung - Version MC (Außengreifen) oder MA (Innengreifen) The mechanical gripping force maintenance devise ensures a minimum gripping force even in case of pressure drop. This act as closing force in the MC version and as opening force in the MA version. In additional, the gripping force maintenance...
Open the catalog to page 6
Gripping systems and automation www.omil.it info@ (dmil.it Type / Typ Minimum operating pressure 4 bar, max 6,5 bar / Betriebsdruck mindestens 4 bar, max 6,5 bar Closing and opening times are purely the times that the base jaws are in motion. Valve switching times, hose filling times, and PLC/CNC reaction times, switching sensor times are not included in the above times and must be taken into consideration when determining cycle times. SchlieB- und Offnungszeiten: sind reine Bewegungszeiten der Grundbacken bzw. - finger. Ventilschaltzeiten, Schlauchbefullungszeiten oder SPS-Reaktionszeiten sind...
Open the catalog to page 7
www.omil.it www.omil.it [email protected] [email protected] Gripping Gripping systems systems and automation and automation 2-finger parallel gripper, pneumatic - series PGP 2-Finger-Parallelgreifer, pneumatisch - Typ PGP Force intensified version – TDM Kraftverstärkungs-Version TDM The TDM cylinder increases the gripping forces during opening and closing. A second, in series-connected, piston also increases the force on the wedge hook. The full force show in the data table is sometimes only reached after a few hundred gripping cycles. Der Kraftverstärkungszylinder TDM erhöht die Greifkräfte beim Öffnen...
Open the catalog to page 8
www.omil.it info@ (dmil.it Gripping systems and automation Minimum operating pressure 2.5 bar, max 6 bar / Betriebsdruck mindestens 2.5 bar, max 6 bar Closing and opening times are purely the times that the base jaws are in motion. Valve switching times, hose filling times, and PLC/CNC reaction times, switching sensor times are not included in the above times and must be taken into consideration when determining cycle times. SchlieB- und Offnungszeiten: sind reine Bewegungszeiten der Grundbacken bzw. - finger. Ventilschaltzeiten, Schlauchbefullungszeiten oder SPS-Reaktionszeiten sind nicht enthalten...
Open the catalog to page 9
www.omil.it www.omil.it [email protected] [email protected] Gripping Gripping systems systems and automation and automation 2-finger parallel gripper, pneumatic - series PGP 2-Finger-Parallelgreifer, pneumatisch - Typ PGP Device to maintenance the gripping force with force intensified – Code TDM-MC (closing) or TDM-MA (opening) Greifkrafterhaltung mit Kraftverstärkungs – Version TDM-MC (Außengreifen) oder TDM-MA (Innengreifen) Only version 1 Nur Version 1 The TDM cylinder increases the gripping forces during opening and closing. A second, in series-connected, piston also increases the force on the wedge...
Open the catalog to page 10All OMIL catalogs and technical brochures
KSB4 Pages
MAP4 Pages
UL4C2 Pages
ARP4 Pages
GPR4 Pages
GAP4 Pages
MCL4 Pages
GZO10 Pages
PZP - 3 finger self-centering24 Pages
OPP8 Pages
PFP6 Pages
FRM4 Pages
FBM8 Pages
C1602 Pages
CFB6 Pages
PAO6 Pages
ARPEP7 Pages
MA46 Pages
Stationary Clamping Systems72 Pages
Gripping-Systems174 Pages
CFB-OJ8 Pages
CFB-MA4 Pages
CFB-MC4 Pages
MSR6 Pages
MIA1-G26 Pages
MFA4 Pages
Sensor switch2 Pages
MPAF/44 Pages
MAS-G34 Pages
PBA4 Pages
AL6 Pages
OPLE4 Pages
Top jaws blanks6 Pages
Pneumatic clamping tombstone2 Pages
MCB6 Pages
MG6 Pages
TC-PAO6 Pages
PAO-MC4 Pages
PGC6 Pages
PLA2 Pages
MFB/44 Pages
GPS 44 Pages
MFB8 Pages
GPS 34 Pages
MAC 38 Pages
