*mydirectindustry

PLA

PLA

Product catalog summary

Specifications:
- Operating pressure range: 3 - 8 bar
- Repeatability accuracy: 0.05 mm over 100 cycles
- Operating temperature: -10°C to 90°C; up to 130°C available upon request
- Operating principle: pistons and levers
- Housing material: high tensile hard-coated aluminium alloy, hard-anodized
- Functional parts material: treated ground steel
- Actuation: compressed air filtered (10 µm), dry or lubricated
- Maintenance: no maintenance required for the first 1.5 million cycles
- Over travel: 1.5°
- Rating: IP 20
- Warranty: 24 months

Technical Data:
- Transportable weight calculated with µ = 0.1 and fs = 2. Greater mass possible with form-fit gripping.
- Gripping force is the arithmetic sum of individual forces at the fingers at 'l' mm distance at 6 bar.

Allowed Load Data:
- Magnetic limit switch seat type D-M9P (SMC) or R626 (OMIL) for closing and opening.
- Maximum allowable forces and moments at the finger are specified for different models (PLA-10, PLA-16).

Model Specifications:

PLA-10:
Max gripping force at 6 bar: 10 N
Moment of inertia: 0.065 Kgcm²
Recommended weight of part for transport: 0.2 kg
Mass: 0.02 kg
Approx. time for opening/closing: 0.02 s
Max gripping torque at 6 bar: 0.035 Ncm
Air consumed for double stroke: 0.03 cm³
PLA-16:
Max gripping force at 6 bar: 20 N
Moment of inertia: 0.16 Kgcm²
Recommended weight of part for transport: 0.8 kg
Mass: 0.03 kg
Approx. time for opening/closing: 0.03 s
Max gripping torque at 6 bar: 0.11 Ncm
Air consumed for double stroke: 0.05 cm³

Recommendations:
- Max finger length/weight is specified for each model.
- Recommendations for max workpiece weight calculated with µ = 0.1 and fs = 2. Larger masses possible with form-fit gripping.

Catalog excerpts

untitled table.main {} tr.row {} td.cell {} div.block {} div.paragraph {} .font0 { font:8.00pt "Arial", sans-serif; } .font1 { font:10.00pt "Arial", sans-serif; } .font2 { font:11.00pt "Arial", sans-serif; } .font3 { font:16.00pt "Arial", sans-serif; } .font4 { font:19.00pt "Arial", sans-serif; } .font5 { font:10.00pt "Courier New", monospace; } .font6 { font:11.00pt "Times New Roman", serif; } Gripping Systems and automation www.omil.it [email protected] 2-finger angular gripperpneumatic - sries PLA 2-Finger-Winkelgreifer pneumatisch - Typ PLA Technische Eigenschaften: Technical data: Betriebsdruck: 3 bis 8 bar Wiederholgenauigkeit: 0.05mm Liber 100 Schaltspiele Betriebstemperaturbereich von -10°C bis 90°C; bis 130°C und hher auf Anfrage Wirkprinzip: doppeltbeaufschlagter Kolben Hebelsynchronisation Material : Gehause aus hochfester Aluminiumlegierung hartbeschichtet, Funktionsteile aus gehartetem Stahl Betatigung : pneumatisch iber gefilterte Druckluft 10|im, trocken oder ge鴴lt Uberspannungswinkel pro Backe1,5° Wartungsfrei: bis 1.5 Mio. Schaltspiele Schutzart IP20 24 Monate Garantie Range of operating pressure : 3 - 8 bar Repeatability accuracy: 0.05 mm; over 100 cycles; Operating temperature: from -10°C to 90°C; version up to 130°C upon request Operating principle: pistons and levers Housing material: high tensile hard-coated aluminium alloy, hard-anodized Material of functional parts: treated ground steel Actuation : compressed air filtered (10 |im), dry or lubricated Maintenance: no maintenance required for the first 1.5 million cycles Over travel 1.5° Rating IP 20 Warranty QMiL Via A. De Francisco 128 - Tel. +39.011.821.11.81 - Fax +39.011.895.44.62 - 10036 Settimo T.se (To) - Italy /l01

Open the catalog to page 1

PLA

PLA

Catalog excerpts

All OMIL catalogs and technical brochures