Optimized substation asset testing for maximum efficiency
16Pages

{{requestButtons}}

Catalog excerpts

Optimized substation asset testing for maximum efficiency - 1

Optimized substation asset testing for maximum efficiency

Open the catalog to page 1
Optimized substation asset testing for maximum efficiency - 2

RESULTS >> Reliable and comprehensive results >> Automatic assessment according to international standards >> Easy data management >> Minimum user interaction, for example, for rewiring >> Controlled usage of high voltages and currents >> Safe distance between test object and test engineer TIME >> One setup for all tests >> Fast preparation, execution and reporting >> Reduced outage times

Open the catalog to page 2
Optimized substation asset testing for maximum efficiency - 3

MAXIMIZE YOUR EFFICIENCY THE IDEA BEHIND OPTIMIZED TESTING Efficiency is the major goal when testing substation assets. The intention is to gather relevant and reliable diagnostic data to be able to make informed maintenance decisions. This must happen in a short time and with reasonable effort while keeping the required outages as limited as possible. This is the idea behind optimized substation asset testing. Thus, all of our test solutions are optimized regarding: >> SAFETY: Maximize safety for operators, assets and the surrounding environment >> TIME: Lowest possible shutdown times for...

Open the catalog to page 3
Optimized substation asset testing for maximum efficiency - 4

Minimum outage time with maximum diagnostic output and safety Power transformer testing Instrument transform TYPICAL TESTING TIME

Open the catalog to page 4
Optimized substation asset testing for maximum efficiency - 5

Circuit breaker testing CIBANO 500 Mimimum outage time for testing Maximum number of test results due to simultaneous testing Maximum safety due to minimum rewiring Save up to

Open the catalog to page 5
Optimized substation asset testing for maximum efficiency - 6

Optimized testing of power transformers using TESTRANO 600 The challenge during testing Power transformers are widely considered the most critical components in electrical transmission and distribution networks. Due to the aging of transformer fleets in the field, regular diagnostic testing and condition assessment become increasingly relevant. TESTRANO 600 is a highly portable, three-phase test system, providing all common electrical tests on power transformers. Its three powerful amplifiers keep the testing time to a minimum while delivering the highest measurement accuracy on the market....

Open the catalog to page 6
Optimized substation asset testing for maximum efficiency - 7

Our scope With our TESTRANO 600 you can perform wide range of standard tests: >> One, simple test setup for all common diagnostic tests >> Transformer turns ratio >> Easy to transport due to its low weight (20 kg / 44 lbs) >> DC winding resistance >> Dynamic resistance >> Short-circuit impedance / leakage reactance >> One database with all asset and test data >> Frequency response of stray losses (FRSL) >> Automatic execution of a series of tests >> Automatic result assessment according to applicable standards >> Power/dissipation factor (with CP TD12/15) >> Intuitive connection, for...

Open the catalog to page 7
Optimized substation asset testing for maximum efficiency - 8

Optimized testing of instrument transformers using CT Analyzer and The challenge during testing Regular testing and calibration of instrument transformers, that are current and voltage transformers, is important to ensure correct operation of protection, accurate metering and billing as well as overall safety. In order to counteract these challenges during testing, we have developed the CT Analyzer and VOTANO 100. Both solutions use model-based approaches for testing current and voltage transformers. During testing, all relevant parameters of the transformer’s equivalent circuit are...

Open the catalog to page 8
Optimized substation asset testing for maximum efficiency - 9

VOTANO 100 Our scope With the CT Analyzer and VOTANO 100 you can perform various measurements, such as: >> Minimum rewiring effort and testing time >> Flexible on-site usage due to its low weight (15 kg / 33 lbs) >> Easy test preparation in advance >> Phase displacement >> Ratio error >> Burden >> Highly accurate results >> High reproducibility of test results >> Automated result assessment >> CT/VT accuracy at different burden and current/voltage conditions >> CT/VT class assessments according to the specific standard requirements >> Guided workflow during test execution >> Transient...

Open the catalog to page 9
Optimized substation asset testing for maximum efficiency - 10

Optimized testing of circuit breakers using CIBANO 500 The challenge during testing Circuit breakers protect all subsequent equipment by interrupting for example, during normal operation or in the event of a system fault in the grid. CIBANO 500 revolutionizes testing of medium and highvoltage circuit breakers by supporting all common tests with one device. Reversely, any malfunction of circuit breakers could result in failures with both extensive physical and economic impact. In addition, just a single test setup can be used to perform all those tests. By using the optional accessories, the...

Open the catalog to page 10
Optimized substation asset testing for maximum efficiency - 11

Our scope With our CIBANO 500 you can perform various tests: >> One device and one setup for all tests >> Timing tests for main contacts, auxiliary contacts and pre-insertion resistor contacts >> Automatic test execution >> Easy to transport due to its low weight (20 kg / 44 lbs) >> Static and dynamic contact resistance >> Motion test >> Coil and motor current test >> Short wires for high accuracy >> Synchronous timing test of all main and auxiliary contacts >> Minimum pick-up test >> Constant power output guarantees reproducible test results >> Both sides grounded circuit breaker >> No...

Open the catalog to page 11
Optimized substation asset testing for maximum efficiency - 12

One software for substation asset testing and data management: Pri Easy data management The Primary Test ManagerTM (PTM) is the ideal software tool for the diagnostic testing and condition assessment of your substation assets: > Easy data management > Fast and safe test execution > Reliable results analysis and assessment > Customized reporting PTM provides a well-structured database for managing all related asset data to get a comprehensive overview of your asset’s condition. Smart definition of assets, locations and jobs You can define and manage assets, locations and jobs in an easy and...

Open the catalog to page 12
Optimized substation asset testing for maximum efficiency - 13

mary Test ManagerTM Fast and safe execution of diagnostic tests Powerful result assessment and reporting PTM enables you to control and operate the connected test set directly from a computer. Results are automatically stored and organized in the database on your PC for further analysis and reporting. Customized test plans Assessment according to standards and customized limits Test plans can be created in advance to enable efficient measurements. You can use the automatic generated test plans which are based on the specified nameplate values, adapt them to your needs and create your own...

Open the catalog to page 13

All OMICRON electronics catalogs and technical brochures

  1. MCT 085

    2 Pages

  2. PDL 650

    8 Pages

  3. CPC 100

    44 Pages

  4. InSight

    4 Pages

  5. MONTESTO 200

    16 Pages

  6. ISIO 200

    8 Pages

  7. CMControl R

    12 Pages

  8. CMControl P

    8 Pages

  9. CMS 356

    2 Pages

  10. IEDScout

    8 Pages

  11. CMA 156

    1 Pages