*mydirectindustry

Zero catalogue

Product catalog summary

Introduction
The Zero Loss Automatic Drain Valve is designed for efficient condensate discharge in compressed air systems, including compressors, dryers, tanks, filters, and separators. Developed with over 20 years of experience, it is suitable for various applications and conditions.

Features and Benefits

Power supply and test button
Potential free contact/alarm
Internal vent and low power solenoid valve
Anodized aluminum body and level sensor
Service kit package and diaphragm discharge valve
Large orifice drain port and built-in mesh filter strainer

Design and Capacity
The Zero drain offers a compact design with large capacity, starting with the Zero4 model, capable of handling significant condensate flow without air loss.

Installation Connections
Various installation options are available, including a 90-degree rotating elbow connector and upper or lower connection options.

Operating Principle
Condensate flows into the aluminum vessel, and when a higher level is reached, an electronic sensor activates the diaphragm solenoid valve to discharge condensate without air loss. An alarm light indicates overflow until discharge is complete.

Additional Options

Heater for below-freezing conditions
Mounting bracket for floor or wall
Different power supply options

Specifications

Model	Compressor Capacity (m³/h)	Dryer Capacity (m³/h)	Filter Capacity (m³/h)	Max. Pressure (bar)	Max. Temperature (°C)	Inlet Connection	Outlet Connection	Power Supply (V/Ph/Hz)	Weight (Kg)
ZERO4	400	800	4000	0.8-16	1-60	½”	¼”	230/1/50	0.80
ZERO8	800	1600	8000	0.8-16	1-60	½”	¼”	230/1/50	0.80
ZERO12	1200	2400	12000	0.8-16	1-60	½”	¼”	230/1/50	0.95
ZERO20	2000	4000	20000	0.8-16	1-60	½”	¼”	230/1/50	0.95

Contact Information
Officine Meccaniche Industriali, Via dell’Artigianato, 34 - 34070 Fogliano Redipuglia (GO) - ITALY. Tel: ++39.0481.488516, Fax: 0481.489871, Website: www.omi-italy.it, Email: [email protected]

Note: OMI reserves the right to change data without prior notice.

Catalog excerpts

RINA ISO 9001 ISO 14001 BSOHSAS 1S001 Certified integrated Systems ZERO SERIES NO LOSS AUTOMATIC DRAIN VALVE

Open the catalog to page 1

Zero Loss drain are designed to efficiently discharge condensate generated by every type of compressed air systems like air compressors, dryers, tanks, filters and separators. Zero drain package offers the most innovative solutions in term of flexibility because thanks to a very compact design it is easily installable under every type of tank even when the bottom clearance is closet o zero. The new drain has been developed thanks to more than 20 years of experience in the field to be easily installed in all applications even under the most critical conditions in terms of port size, installation...

Open the catalog to page 2

LARGE CAPACITY WITH ENERGY SAVINGS INSTALLATION CONNECTIONS Zero drain has been developed with a compact design but with an extra large capacity starting with the smaller model Zero4 that is capable to handle large flow of condensate with no loss of compressed air. Zero series has a large variety of installation connections options like 90 rotating elbow connector and a upper or lower connection option. OPERATING PRINCIPLE During operation condensate flows into the aluminum vessel (1) and when higher level is reached, the electronic sensor (2) gives the contact to the electronic microprocessor...

Open the catalog to page 3

Specification Model ZERO4 ZERO8 ZERO12 ZERO20 Compressor capacity (m3/h) Inlet connection Outlet connection Power supply (V/Ph/Hz) This catalogue replaces all previous ones. OMI reserves the right to change the mentioned data without prior notice. OFFICINE MECCANICHE INDUSTRIAL Via dell'Artigianato, 34 - 34070 Fogliano Redipuglia (GO) - ITALY Tel. ++39.0481.488516 - Fax. 0481.489871 www.omi-italy.it e-mail: [email protected]

Open the catalog to page 4

All OMI Officine Meccaniche Industriali catalogs and technical brochures

Archived catalogs

OMI General Catalogue
70 Pages
General catalogue
72 Pages