F / SA catalogue
8Pages

{{requestButtons}}

Catalog excerpts

F / SA catalogue - 1

COMPRESSED AIR TREATMENT TRATTAMENTO ARIA COMPRESSA F SERIES – SA SERIES COMPRESSED AIR FILTERS / FILTRI PER ARIA COMPRESSA CONDENSATE SEPARATORS / SEPARATORI DI CONDENSA

Open the catalog to page 1
F / SA catalogue - 2

WHY AIR FILTER Compressed air in industrial applications contains in 1Nmᶟ more than 100 million of polluting particles. Most of these particles are so small in dimension, less than 5 micron, that they cannot be intercepted by the standard intake filters installed in the compressors. Such particles, mixed with water and oil vapours generated during compression, cause the early wear and tear of the appliances and consequently they are the cause of expensive interruptions of the production and remarkable increase the number of interventions for maintenance purposes. A right selection of...

Open the catalog to page 2
F / SA catalogue - 3

PROFESSIONAL CONCEPT DIFFERENTIAL PRESSURE GAUGE The differential pressure gauge can be mounted facing either direction and accurately indicates when filter element needs replacing. Alternatively a differential pressure colour indicator could be used. MANOMETRO DIFFERENZIALE Il manometro differenziale può essere montato in entrambe le direzioni ed indica quando la cartuccia deve essere sostituita. In alternativa, si può utilizzare un indicatore differenziale. REDUCED INSTALLATION SPACE Only 6 cm – up to 20 cm for the bigger filters – of clearance is needed under the filter bowl for...

Open the catalog to page 3
F / SA catalogue - 4

SOLID CONTAMINANT PREFILTER QF SERIES DUST FILTER DF SERIES A protective dust filter suitable or the removal of solid, liquid and emulsionated particles down to 10 microns. A long working life coupled with a strong resistance to heat and abrasion make this filter the perfect choice for protecting your compressed air pipe system, machineries and accessories. The ceramic material is suggested for all the heavy duty applications. 4 STEPS KLICK - ON FIXATION Prefilter suitable for the removal of solid particles down to 5 micron including liquid, emulsions and oil particles. The strong...

Open the catalog to page 4
F / SA catalogue - 5

Coalescing filter for liquid and solid particles up to 0,01 micron and 0,1 mg/mᶟ. HF type filter is structurally similar to the PF series. The only difference lies in the filtration degree. Air passing through this filter is practically 99.99% oil free, therefore it is suitable to be employed when and where clean and pure air is a must. When placed after a dryer as an additional despoiling filter is an excellent prefilter for the CF series. (0,001 mg/mᶟ upon request) ACTIVATED CARBON FILTER CF SERIES There are treatments in industrial plants which in addition to oil free air, require the...

Open the catalog to page 5
F / SA catalogue - 6

DIFFERENTIAL PRESSURE GAUGE Displays the exact grade of saturation of the filter element. Available upon request. MANOMETRO DIFFERENZIALE Visualizza l'esatto grado di saturazione della cartuccia del filtro. Disponibile su richiesta. DIFFERENTIAL PRESSURE INDICATOR Colour visual indicator of the differential pressure drop through the filter element. Available upon request. INDICATORE DIFFERENZIALE Indicatore visivo colorato regolato dalla pressione differenziale. Visualizza il grado di intasamento dell'elemento filtrante. TIMED DRAIN Thanks to the use of a timer that controls interval and...

Open the catalog to page 6
F / SA catalogue - 7

CYCLONE TYPE CONDENSATE SEPARATORS Easy to install it is the best solution to remove the condensation generated during the compression process. Upon request equipped with floating, timed or no loss condensate drains. APPLICATION - Downstream of an air compressor - Downstream an after cooler - Downstream an air receiver SEPARATORI DI CONDENSA A CICLONE Di facile installazione, sono il prodotto ideale per separare la condensa formatasi nei compressori prima di entrare nel serbatoio o nell’essiccatore. A richiesta forniti completi di scaricatore di condensa automatico a galleggiante,...

Open the catalog to page 7
F / SA catalogue - 8

TECHNICAL DATA / DATI TECNICI CONNECTIONS CONNESSIONI WEIGHT PESO FLOW-RATE PORTATA MODEL MODELLO STANDARD REFERENCE CONDITIONS CONDIZIONI STANDARD DI RIFERIMENTO Ambient temperature Working pressure Inlet air temperature Temperatura ambiente Pressione di esercizio Temperatura ingresso aria Temperatura massima ingresso aria Please contact our sales department for non-standard working conditions. Per condizioni di lavoro differenti da quelle standard contattare il nostro ufficio commerciale. Correction factors for different working pressure / Fattore di correzione per diverse pressioni di...

Open the catalog to page 8

All OMI Officine Meccaniche Industriali catalogs and technical brochures

  1. F 0700

    1 Pages

  2. ED catalogue

    10 Pages

Archived catalogs