NEOS II TRI ac
4Pages

Electric Transverse Seat Tri-Lateral Stacker The new electric transverse seat tri-lateral stacker Neos II 25 TRI ac, has been designed to transport and lift loads in very tight aisles and storage spaces. Chassis The mono bloc chassis construction ensures maximum stability and superior mechanical strength in all drive and stacking situations, maintaining high residual capacities even at maximum heights. The battery compartment is easily accessible by lifting the bulkhead, simplifying daily and periodical checks and recharging. The standard lateral battery removal system on rollers simplifies battery replacement for heavy duty use over several work shifts. Drive Reliable sensor less three phase current traction drive motor able to meet the most demanding performance requirements, delivering the necessary power under all load conditions as the traction speed exactly depends on the position of accelerator pedal. Electronic system The entire Neos II range is equipped with inverter electronic equipments. These controls monitor all the machine’s functions and allow any adjustment to optimise the performance of the machine, adapting it to the type of work it has to carry out. All the parameters relating to drive, braking and hydraulic functions are electronically adjustable by the dashboard of the remote desktop directly from OMG according to the different customer needs. Hydraulic functions Powerful and noiseless lift motor in alternated current ac controlled by proportional solenoids which regulates the pump rpm, always providing the right quantity of oil. All the hydraulic functions are controlled by finger tips which ensure precise and safe load handling for the operator. Lifting gear with integrated braking system granting gradual slow down at end of travel avoiding rough stops which could compromise load stability.

Service weight incl. battery (see line 6.5) Axle loading, unladen front/rear Axle loading, mast advanced, laden front /rear Axle loading, mast retracted, laden front /rear Wheels Chassis Tires Tire size, front Tire size, rear Wheels, number front / rear (x = driven wheels) Track width, front Track width, rear Fork carriage tilt forward /backward Mast lowered height Free lift Lift height Mast extended height Overhead load guard (cab) height Seat height Height of wheel arms Overall length Length to face of forks Overall width Forks dimensions Fork carriage ISO 2328, class /type A, B Fork...

Standard masts Denomination Mast lowered height Total Lift height Mast extended height Lift height load / pallet dimension depth forking side Accessories and special executions multifunctions monojoystick metal cab for cold store execution flashing beacon with reverse buzzer cold store execution battery side extraction heating system for cold store cab single battery stand with wheels digital lifting height indicator and pre-selector for 10 levels adjustable spot lamps camera on the forks with color monitor inside the cab load protection guard camera on the forks holder plate with color...

Masts The masts, cold drawn section, ensure torsional and bending rigidity, and are available with the following characteristics: • triplex with full free lift large total free lift and lifting heights available from 7.500 to 9.000 mm; Finger tip (standard) The hydraulic functions by finger tip ensure the operator to make a precise and safe load handling. Operator’s driving position • adjustable comfort seat; • longitudinally adjustable steering wheel; • anti slippery operator’s feet platform; • LCD dash board showing the following necessary data for the manoeuvre: - parking brake...