SDC-MP HEAT EXCHANGERS The range of heat exchangers OMFB offers new improvements to increase the performances and service features. - Introduction of new sizes for both standard and integrated by-pass versions: - New thermostats with pre-cabled wiring and waterproof connections. - Choice of thermostat between ON-OFF standard version or proportional Soft-Start version. The main advantages offered by the new series are: - Reduction of installation time thanks to the pre-cabled wiring; - Better performances thanks to the new Soft-Start thermostat; - Wider range of choice to better match applications’ requirements. Full technical data sheets are available on our web site www.omfb.it STANDARD HEAT EXCHANGER HEAT EXCHANGER WITH BY-PASS Via Cave, 7/9 - 25050 Provaglio d’Iseo (Bs) Italy - Tel. 030 9830611 - Fax 030 9839207-208 www.omfb.it - info@omfb.

The new part numbers are already available and replace the previous ones. The thermostat has to be ordered separately according to your requirements. Old code The thermostats for heat exchanger series SDC-MP are supplied with wiring kit already included to make installation easier and quicker. There are two versions available: ON/OFF and progressive Soft Start. They both offer power output from the ca sing of the thermostat itself, therefore the use of an external relay is not required. ON-OFF VERSION SOFT START VERSION Operation temperature Operation temperature The Soft Start version is multivoltage...