FLEXDRAIN - CSC2K -Silicon elastomer insulated drain-line heaters with integrated thermostat

Product catalog summary

Applications
CSC2K heaters are designed for use in refrigeration equipment, specifically at the bottom of collector trays in cold rooms. Their primary function is to prevent freezing and ensure the free flow of condensate water. The heaters are equipped with an integrated thermostat, making them fully autonomous. For plastic trays, a power rating of 40 W/m is recommended, while the most common rating is 50 W/m.

Characteristics
The CSC2K heaters feature an integrated thermostat, are fully sealed, and have double insulation. They are extremely flexible and operate at a standard voltage of 230 V. The power cable is 1 meter in length. The heating wire is made of Nickel-Chrome or Nickel-Copper, insulated with silicon elastomer, and has a section size of 5 x 7 mm. The power options are 40 or 50 W/m, with a maximum voltage of 500 V. The permissible surface temperature ranges from -40°C to +110°C. Tolerances include power at ±10%, section at +0.2 / -0.1 mm, and length at ±1%.

Specifications
The heaters are terminated with a heat-shrink sheath with adhesive for end insulation. The thermostat is pre-set to operate between +5°C and +15°C. The termination size is 18 x 16 mm with the thermostat. The power output varies with length, ranging from 40 W for 1 meter at 40 W/m to 300 W for 6 meters at 50 W/m.

Usage Instructions
Drain-line cables function as series resistors. It is crucial not to cut the cables to shorten the cold tail. The thermostat sensor must be positioned optimally to ensure proper operation. Users should consult the catalogue for general operating principles, instructions for use, and available accessories.

Contact Information
FLEXELEC S.A.S and its departments in Asia, the UK, and Germany provide contact details for further inquiries and support.

Catalog excerpts

FLEXDRAIN - CSC2K -Silicon elastomer insulated drain-line heaters with integrated thermostat-1

insulation Silicon elastomer insulationSilicon elastomer Heating wire Fibre glass core > Heating section Conductor cable > Termination 18 x 16 mm with thermostat > These cables must never be cut to shorten the cold tail. The roundpart of the thermostat (sensor) must be placed in the best positionto collect information so that the cable can operate as required. > Drain-line cables are series resistors. Consult the pages of the catalogue devoted to the corresponding general operating principles, general instructions for use and accessories. FLEXELEC S.A.S FLEXELEC Dept FLEXELEC (UK) Ltd FLEXELEC Dept 10, rue des frШres Lumire Z.A. du Bois Rond 69720 ST BONNET DE MURE - FRANCETel:+ 33 (0)4.72.48.30.90 Fax:+ 33 (0)4.78.40.82.81 E-mail: [email protected] OMERIN ASIA Pte Ltd 51 Goldhill Plaza #08-12/01 SINGAPORE 308900 Tel:+ 65.6255.4778 Fax: + 65.6255.4779 E-mail: [email protected] Unit 11 Kings Park Industrial Estate Primrose Hill - KINGS LANGLEY Hertfordshire WD4 8ST - UK Tel:+ 44 (0) 1923.274477 Fax: + 44 (0) 1923.270264 E-mail: [email protected] OMERIN GmbH Tennweg 2 B D-65510 IDSTEIN - GERMANY Tel:+ 49 (0) 6126.94.31-0 Fax: + 49 (0) 6126.83.99 E-mail: [email protected]

Open the catalog to page 1

FLEXDRAIN - CSC2K -Silicon elastomer insulated drain-line heaters with integrated thermostat

FLEXDRAIN - CSC2K -Silicon elastomer insulated drain-line heaters with integrated thermostat

Catalog excerpts

All OMERIN catalogs and technical brochures