Catalogs >
OMEGA >
Turbine Flowmeters With Local Digital Display

Turbine Flowmeters With Local Digital Display
2Pages

Catalog excerpts

Turbine Flowmeters With Local Digital Display - 1

Turbine Flowmeters With Local Digital Display FTB790 Series All models shown smaller than actual size. APPROVED APPROVED U ndicates Both I Rate and Total U U p to 1% Reading Accuracy U 6-Digit Display U ignal Output S Capabilities G U PM or LPM (Field Selectable) B U attery Operated (Included) U VDF (FTB890) or P PVC (FTB690) Models Also Available FTB790 Series turbine meters with microprocessor-based electronics offers a durable, compact, high-precision fluid measurement device, with total and rate indication. Information is clearly displayed on a large 6-digit liquid crystal display with only 2-point floating decimal for totals from 0.01 to 999,999. All operations are easily performed with only 2 buttons. The basic unit and display are powered by 2 lithium batteries, providing up to 5 years of use. Cumulative total, batch total, and rate of flow are standard. A singlepoint field calibration curve can be stored in memory. The turbine meter can also be ordered without display electronics. A special pulse output model (FLSC790-P-ND) must be ordered to obtain an open collector current sinking output operated on 9 to 35 Vdc. The output is a square wave pulse with a 3-wire connection. Accessories for Turbine Meters With the Display: The FLSC790-MA provides a 4 to 20 mA or 0 to 5 Vdc output for rate indication. The output module requires field calibration. The 4 to 20 mA dc is a 2-wire system requiring 8 to 30 Vdc power (24 Vdc recommended). The FLSC790-P pulse output module provides an unscaled open collector sinking output operating on an applied voltage of 0 to 60 Vdc. The output is a square wave pulse with an amplitude the same as the supplied voltage. The FTB790-RK remote kit allows remote mounting of display electronics. This option expands the applications into wider fluid temperature ranges to -40 to 121°C (-40 to 250°F). The LCD display can be mounted up to 90 m (300') from the turbine meter. The FLSC790-90D is a 90° mounting adaptor designed to allow displays to be mounted 90° from the standard position

Open the catalog to page 1

Turbine Flowmeters With Local Digital Display - 2

Accuracy: G2S05N09GMA : ±2% rdg G2S07N09GMA, G2S10N09GMA : ±1.5% rdg G2S15N09GMB, G2S20N09GMB: ±1.0% rdg Extended Low Flow Range Accuracy: ±5.0% of reading (display models only) Repeatability: ±0.1% Pressure Rating: 1500 psig (103 bar) With “-HP” Option: 3000 psig (207 bar) Temperature Range: With Remote Electronics Kit: -40 to 121°C (-40 to 250°F) Without Remote Electronics: -10 to 60°C (14 to 140°F) Viscosity: Rated accuracy for fluids with viscosity of water (1 cSt); meters with display can be used for fluids up to 100 cSt with field calibration Wetted Components: Housing: 316 SS Journal...

Open the catalog to page 2