Catalogs >
OMEGA >
Temperature, Process and Strain Meters: i series

Temperature, Process and Strain Meters: i series
4Pages

Catalog excerpts

Temperature, Process and Strain Meters: i series - 1

Temperature, Process and Strain Meters DPi32, shown smaller than actual size. DPi16, shown smaller than actual size. DPi8, shown smaller than actual size. U niversal Inputs U U ser-Friendly, Simple to U Configure U igh Quality H U owerful Features P U xtended 5-Year E Warranty U ree Software F U otally Programmable T Color Displays U igh Accuracy: 0.5°C H (±0.9°F), 0.03% Reading U oth RS232 and RS485 B MODBUS®, Selectable from Menu Available U uilt-In Excitation B U mbedded Internet E Connectivity Optional U RS232 and RS485 Serial Communications Optional U emperature Stability T ±0.04°C/°C RTD and ±0.05°C/°C Thermocouple @ 25°C (77°F) U AC or DC Powered Units U atiometric Mode for R Strain Gages U Programmable Digital Filter The OMEGA® iSeries is a family of microprocessor-based instruments offered in three true DIN sizes with NEMA 4 (IP65) rated front bezels. All of the instruments share the same set-up and configuration menu and method of operation, a tremendous time saver for integration of a large system. The iSeries family includes extremely accurate digital panel meters “DPi” and single loop PID controllers “CNi” that are simple to configure and use, while providing tremendous versatility and a wealth of powerful features. The DPi Series covers a broad selection of transducer and transmitter inputs with 2 input models. The Universal temperature and process instrument (DPi models) handles 10 common types of thermocouples, multiple RTDs and several process (DC) voltage and current ranges. This model also features built-in excitation, 24 Vdc @ 25 mA. With its wide choice of signal inputs, this model is an excellent choice for measuring or controlling temperature with a thermocouple, RTD, or 4 to 20 mA transmitter. The strain and process instruments (DPiS models) measure inputs from load cells, pressure transducers, and most any strain gage sensor as well as process voltage and current ranges. The DPiS has built-in 5 or 10 Vdc excitation for bridge M-9 transducers, 5 Vdc @ 40 mA or 10 Vdc @ 60 mA (any excitation voltage between 5 and 24 Vdc is available by special order). This DPiS model supports 4- and 6-wire bridge communications, ratiometric measurements. The DPiS features fast and easy “in process” calibration/ scaling of the signal inputs to any engineering units. This model also features 10-point linearization which allows the user to linearize the signal input from extremely nonlinear transducers of all kinds. Programmable Color Display The DPi Series are 1⁄8, 1⁄16 and 1⁄32 DIN digital panel meter featuring the big iSeries color-changing display. The digits are twice the size of typical 1 ⁄8 DIN panel meters. The iSeries meters feature the only LED displays that can be programmed to change color between GREEN, AMBER, and RED. Embedded internet and serial communications featuring optional “embedded Internet” (specify “-EIT” option) the iSeries are the first instruments of their kind that connect directly to an Ethernet network and transmit data in standard TCP/ IP packets, or even serve Web pages over a LAN or the Internet. The iSeries are also available with serial communications. With the “-C24” option, the user can select from the pushbutton menu between RS232, RS422, and RS485, with straightforward ASCII commands or MODBUS.

Open the catalog to page 1

Temperature, Process and Strain Meters: i series - 2

iSeries Controllers Also Available! els ies Mod CNi Ser trol and n with Co utputs, Alarm O ga.com e Visit om CNi16D, shown actual size. Visit omega.com/cni16_series Patented Totally Programmable Color Displays Options Ordering Suffix Description Network Options Ethernet with -EIT embedded internet Isolated RS232 and -C24 RS485, 300 to 19.2 KB with embedded Ethernet Web server + isolated -C4EIT RS485/422 hub for up to 31 devices 1 2 to 36 Vdc*, 24 Vac (standard power input: -DC 90 to 240 Vac/dc, 50 to 400 Hz) Factory Setup Factory setup and -FS configuration Customized DPiS model for...

Open the catalog to page 2

Temperature, Process and Strain Meters: i series - 3

Common Specifications (All i/8, i/16, i/32 DIN) Input Impedance: 10 MΩ for 100 mV; Universal Temperature and Process Input (DPi/CNi Models) 1 MΩ for 1V or 10 Vdc Accuracy: ±0.5°C temp; 0.03% rdg Resolution: 1°/0.1°; 10 µV process Temperature Stability: RTD: 0.04°C/°C TC @ 25°C (77°F): 0.05°C/°C Cold Junction Compensation Process: 50 ppm/°C NMRR: 60 dB CMRR: 120 dB A/D Conversion: Dual slope Reading Rate: 3 samples/s Digital Filter: Programmable Display: 4-digit 9-segment LED 10.2 mm (0.40"); i32, i16, i16D, i8DV 21 mm (0.83"); i8 10.2 mm (0.40") and 21 mm (0.83"); i8DH RED, GREEN, and AMBER...

Open the catalog to page 3

Temperature, Process and Strain Meters: i series - 4

Your One-Stop Source for Process Measurement and Control! UNITED STATES Deckenpfronn, Germany UNITED KINGDOM Manchester, England More than 100,000 Products Available! Calibrators, Connectors, General Test and Measurement Instruments, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders, Relative Humidity Measurement Instruments, PT100 Probes, PT100 Elements, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching...

Open the catalog to page 4