Temperature, Pressure, Humidity & Tri-Axial Shock Data Logger Tri-Axial Shock Data Logger • Compact size • 3-axis shock • Temperature, humidity, pressure (OM-CP-ULTRASHOCK-A only) • Fully configurable measurements • Long life rechargeable battery • Large capacity event memory • Programmable start time • Real time operation • CE compliant • Separate low-g and high-g accelerometers The OM-CP-ULTRASHOCK-A is a 3-axis shock / acceleration data logger with additional channels for temperature, humidity and barometric pressure. Each of the six channels may be made active or inactive as needed. Disabling channels will provide additional storage to the enabled channels. The OM-CP-SHOCK300 is a 3-axis shock / acceleration data logger. Each of the three channels may be made active or inactive as needed. Disabling channels will provide additional storage to the enabled channels. The OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300 are specifically designed for documenting dynamic environments such as moving vehicles, trucks, containers, ships, etc. The device is also valuable in characterizing environments such as production and assembly lines of delicate electronics, IC fabrication, communications and computer components. The OM-CP-ULTRASHOCK-A and OM-CP-SHOCK300 contain two separate accelerometers to provide high sensitivity and accuracy up to 15g or higher levels of shock monitoring up to 300g. One of three operating ranges must be chosen during setup for a logging session. Those ranges are +/- 15g (low g accelerometer), +/- 100g and +/- 300g (high g accelerometer). OM-CP-SHOCK300 Specifications SHOCK Accelerometer Type Acceleration Range (g) Acceleration Resolution (g) Calibrated Accuracy (g) Sampling Rate MEMS Semiconductor Accelerometer Freq. Resp. Reading Rate >1000 Hz (15 g) >500 Hz (100 g, 300 g) 1024 Hz to 5 minutes, selectable in software.

OM-CP-ULTRASHOCK-A Specifications General Specifications GENERAL 3,593,358 readings (598,893 per channel, all channels in use) Software programmable immediate start or delay start, up to 6 months in advance May be used with PC to monitor and record data in real time at a 1 second sample rate An optional password may be programmed into the device to restrict access to configuration options. Data may be read out with the password. Digital calibration through software Calibration Date Automatically recorded within device Battery Type Internal Lithium Ion pack, charger included 90 days typical at...