Catalogs >
OMEGA >
DRP 8500

DRP 8500
3Pages

Catalog excerpts

DRP-8500 Series Low Cost Analog to Frequency Modules for Micro PLC Digital Inputs From ߜ DRP-8500 Series Connect to Micro PLCs High Speed Counter Inputs ߜ DRP-8600 Series Connect to Micro PLCs 24 VDC Logic Inputs ߜ Voltage, Current, RTD, Thermocouple and Strain Gage Inputs ߜ DIN Rail Mountable The DRP-8500 Series modules offer a low cost analog I/O solution for micro PLCs. The series is ideal for discrete automation applications requiring one or two analog I/O channels. All models in the series interface with the PLC high speed counter inputs or pulse outputs. Digital signal pulse-width is fixed at 50 µsec. They will accept a variety of analog inputs, such as thermocouple, RTD, strain gage, voltage, and current. Some DRP8500 models can be connected to pulse outputs from a PLC, and will then provide an analog output. The DRP-8500 series modules have an isolated floating optocoupler transistor which provides DC isolation from the input, output and DC power. The output transistor is fully floating allowing either source or sink connection to the PLC. The DRP-8500 resolution is 12 bits. The DRP-8600 Series modules are designed to interface with the lowspeed 24 Vdc logic inputs of a PLC for applications requiring additional analog inputs. The DRP-8600 modules output a square wave up to 500 Hz with a 50-50 duty cycle, allowing the PLC to count the frequency producing better than 8bit resolution, 1 part in 500. The DRP-8600 module has an isolated floating optocoupler transistor which provides DC isolation from the input, output and DC power. The output transistor is fully floating allowing either source or sink connection to the PLC.

Open the catalog to page 1

All modules are housed in a plastic case with a built-in Ufoot for mounting on standard DIN rails. Connections are made to screw clamp terminals that accept wire sizes 22 AWG to 16 AWG. Common Specifications (contact engineering for detailed specifications) Connections: Screw terminals, 22 to 16 AWG Power: 24 volts nominal Size: 42 H x 27 W x 96 mmL (1.65 x 1.06 x 3.78") Weight: 85 g (3 oz) DRP-8500 Series shown smaller than actual size MOST POPULAR MODELS HIGHLIGHTED! To Order (Specify Model Number) Model Number Price Input Analog to Frequency (High Speed Counter Input) 1,000 to 5,000 Hz...

Open the catalog to page 2

Your One-Stop Source for Process Measurement and Control! UNITED STATES Deckenpfronn, Germany UNITED KINGDOM Manchester, England More than 100,000 Products Available! Calibrators, Connectors, General Test and Measurement Instruments, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders, Relative Humidity Measurement Instruments, PT100 Probes, PT100 Elements, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching...

Open the catalog to page 3