Catalogs >
OMEGA >
DIN Rail Mount Signal Conditioners

DIN Rail Mount Signal Conditioners
7Pages

Catalog excerpts

DIN Rail Mount Signal Conditioners A/IN DRG-SC Series U odels Available for M Thermocouples, RTDs, DC Voltage and Current, Frequency, Strain Gage Bridge, AC Voltage and Current U ield Configurable Input F and Output Ranges U ive Field Configurable F Output Ranges: 0 to 5 V, 0 to 10 V, 0 to 1 mA, 0 to 20 mA and 4 to 20 mA U lim Housing Mounts on S DIN Rail for High Density Installations U 800 Volts Isolation 1 Between Input, Output and Power Supply D-DRG A&B Front D-DRG A&B Side Field Configurable One advantage of the DRG series is the field configurable input and output ranges. Each module can be set to a number of ranges by dip switch selection. Wide ranging precision zero and span potentiometers provide even further adjustment. The signal conditioners may be set for an almost limitless number of ranges. Range adjustment requires the use of a calibrator or reference source. The DRG Series signal conditioner modules accept a wide variety of input signals such as thermocouples, RTDs, strain gages, DC voltages/currents, AC voltages/currents, frequency and potentiometers and produce a proportional conditioned process output. The inputs and outputs are both field configurable and offer flexible wide ranging capability. The slim housing mounts on a DIN rail and is ideal for high density installation. All modules provide 1800 Vdc isolation between the input, output and power supply. FRONT VIEW SIDE VIEW - STYLE A or B To Order Visit omega.com/drg-sc for Pricing and Details Model No. DRG-SC-AC DRG-SC-BG DRG-SC-DC-B DRG-SC-DC-U DRG-SC-FR DRG-SC-PT DRG-SC-RTD DRG-SC-TC AC Voltage and Current Strain Gage Bridge DC Voltage and Current (bipolar) DC Voltage and Current (unipolar) Frequency Potentiometer RTD Thermocouple

Open the catalog to page 1

Specifications DRG-SC-AC Range (voltage mode): 100 mV to 200 Vac Impedance (voltage mode): >100 KΩ Overload (voltage mode): 300 Vac, max. Range (current mode): 10 mA to 100 mAAC Impedance (current mode): 20 Ω, typical Overcurrent (current mode): 200 mAAC Overvoltage (current mode): 60V rms Frequency Range: 40 to 400 Hz, factory calibrated at 60 Hz Accuracy (including linearity, hysteresis): ±0.1% of span, typical; ±0.5% of span, maximum. Response Time: (10-90%) 250 mS., typical Power: 9-30 Vdc, 1.5 W typical, 2.5 W max. DRG-SC-BG Range: 10 mV to ±200 mV Impedance: >1 MΩ Overvoltage: 400...

Open the catalog to page 2

Thermocouple Input Signal Conditioner DRG-SC-TC The DRG-SC-TC is a DIN rail mount thermocouple input signal conditioner. It can be field configured for over 60 different thermocouple temperature ranges. The output is linear to temperature and can be set for either 0-5 V, 0‑10 V, 0-1 mA, 0-20 mA or 4-20 mA. Zero and span pots allow 50% adjustability of offset and span turn down within each of the ranges. For example the 500-1000°C range could be offset and turned down to provide a 4-20 mA signal representing 750-1000°C. Input Ranges °C DRG-SC-TC, side view. DRG-SC-TC, front view. To Order...

Open the catalog to page 3

DC Input Signal Conditioner DRG-SC-DC The DRG-SC-DC is a DIN rail mount DC voltage and current input signal conditioning module. The input can be field configured for any one 12 voltage ranges from 10 mV to 100 V or 6 current ranges from 1 mA to 100 mA. The output is linear to the input and can be set to either 0-5 V, 0-10 V, 0-1 mA, 0‑20 mA or 4-20 mA for the DRG‑SC-DC-U (unipolar outputs) and -5 V to +5 V or -10 V to +10 V for the DRG-SC-DC-B (bipolar outputs). Zero and span pots allow 50% adjustability of offset and span turn down within each of the ranges. For example the 0-2 mA input...

Open the catalog to page 4

RTD Input Signal Conditioner DRG-SC-RTD The DRG-SC-RTD is a DIN rail mount RTD input signal conditioning module. It accepts a wide variety of RTDs including 100, 500 and 1000 Ohm Platinum RTDs as well as 10, 25 and 100 Ohm copper. It works with RTDs with a = 0.00385Ω/Ω/°C or 0.00392.Ω/Ω/°C The input can be field configured for any one of up to sixteen temperature ranges. The output is linear to temperature and can be set for either 0-5 V, 0-10 V, 0‑1 mA, 0-20 mA or 4-20 mA. Input Ranges (°C): PT100, PT500 and PT1000: -200 to 600, -200 to 400, ‑100 to 400, -200 to 260, -200 to 0, -200 to...

Open the catalog to page 5

Potentiometer Input Signal Conditioner DRG-SC-PT The DRG-SC-PT is a DIN rail mount potentiometer input signal conditioning module. The input provides a constant voltage and is designed to accept any three-wire potentiometer from 100 Ω to 100 KΩ. The field configurable output can be set for either 0-5 V, 0-10 V, 0-1 mA, 0-20 mA or 4-20 mA. Wide ranging, precision zero and span pots, used in conjunction with DIP switches, allow 80% adjustability of offset and gain to transmit a full scale output from any 20% portion of the potentiometer input. Input Range: 100 Ω to 100 KΩ To Order Visit...

Open the catalog to page 6

Your One-Stop Source for Process Measurement and Control! UNITED STATES Deckenpfronn, Germany UNITED KINGDOM Manchester, England More than 100,000 Products Available! Calibrators, Connectors, General Test and Measurement Instruments, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders, Relative Humidity Measurement Instruments, PT100 Probes, PT100 Elements, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching...

Open the catalog to page 7