Catalogs >
OMEGA >
CSMSTRSX, CSMSTRGT

CSMSTRSX, CSMSTRGT
3Pages

Catalog excerpts

ENHANCED MODULAR CONTROLLER SERIES MASTER CSMSTR l rovides Enhanced Features for Data Acquisition P Or Multi-Zone Pid Control Applications l ebserver Provides Worldwide Access to W Data Logs and Virtual HMI l irtual HMI Offers Built-In PC-Based V SCADA Functionality l erforms Hierarchical Control of Other Modules P in the Modular Controller Series l tores Module Configuration Information, S and Automatically Reprograms Replaced Modules l xtensive Built-In Driver List Allows Easy E Data Mapping to PLCs, PCs, and SCADA Systems l ndependent Serial Ports Provide Virtually I Unlimited Integration Methods l 0 Base-T/100 Base-Tx Ethernet Connection 1 Provides Networking Capability l upports up to 16 Modular Controller S Series Modules l Compactflash® Slot Allows Process Data to be Logged Directly to CSV Files CSMSTRSX shown smaller than actual size. The CSMSTR is programmed with Crimson 2.0 software for Windows® 2000 or later platforms. The software is an easy to use, graphical interface which provides a means of communication configuration, as well as commissioning and calibration of new systems. SPECIFICATIONS The Model CSMSTR is a communications and control platform designed for use with Modular Controller Series slave modules. The CSMSTR uses a proprietary high speed serial protocol to communicate, via backplane connection, with up to 16 slave modules. Through the same connection, the Master also provides power to the modules. When powered up, the CSMSTR automatically identifies and addresses connected slave modules. By storing the configuration information of all of the modules, the CSMSTR is able to automatically configure modules if they are replaced. The Master provides high-speed RS232/422/485 communication ports and an Ethernet port for connection to PCs, PLCs, and SCADA systems. An extensive list of master and slave protocol drivers are available to allow the CSMSTR to share and exchange variable data with external devices. The 10 Base-T/100 Base-TX Ethernet port can also be used to connect and share data with other devices at high speeds. The virtual HMI feature allows you to create and control an HMI from any networked PC. An onboard CompactFlash slot provides storage for the Master’s built-in data logger. The design of the Modular Controller Series high density packaging and DIN rail mounting saves time and panel space. The controller snaps easily onto standard top hat (T) profile DIN rail. Power: 24 Vdc ± 10% 400 mA min. (1 module) 3.5 Amps maximum (16 modules + Expansion Card) Must use Class 2 or SELV rated power supply Communications: USB/PG Port: Adheres to USB specification 1.1 (Device only using Type B connection) Serial Ports: Format and Baud Rates for each port are individually software programmable up to 115,200 baud RS232/PG Port: RS232 port via RJ12 COMMS Ports: RS422/485 port via RJ45, and RS232 port via RJ12 DH485 TXEN: Transmit enable; open collector, VOH=15 Vcd, VOL=0.5 V @ 25 mA maximum Ethernet Port: 10 BASE-T / 100 BASE-TX RJ45 jack is wired as a NIC (Network Interface Card) LEDs: STS: Status LED indicates condition of master TX/RX: Transmit/Receive LEDs show serial activity Ethernet: Link and activity LEDs CompactFlash LED indicates card status CF: and read/write activity Memory: On-Board User Memory: 4MB of non-volatile flash memory On-Board SDRAM: CSMSTRSX=2MB; CSMSTRGT=8MB Memory Card: Compactflash type II slot for type I and type II cards

Open the catalog to page 1

Real-Time Clock: Typical accuracy is less than one minute per month drift. Crimson 2.0’s SNTP facility allows synchronization with external servers Battery: Lithium coin cell (included). Typical lifetime of 10 years at 25°C (77°F) A “battery low” system variable is available so that the programmer can choose specific action(s) to occur when the battery voltage drops below its nominal voltage. Environmental Conditions: Operating Temperature Range: 0 to 50°C (32 to 122°F) Storage Temperature Range: -30 to 70°C (-22 to 158°F) Operating and Storage Humidity: 80% max relative humidity,...

Open the catalog to page 2

Your One-Stop Source for Process Measurement and Control! UNITED STATES Deckenpfronn, Germany UNITED KINGDOM Manchester, England More than 100,000 Products Available! Calibrators, Connectors, General Test and Measurement Instruments, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders, Relative Humidity Measurement Instruments, PT100 Probes, PT100 Elements, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching...

Open the catalog to page 3