Catalogs >
OMEGA >
Conductivity, Resistivity or TDS Controller

Conductivity, Resistivity or TDS Controller
1Pages

Catalog excerpts

Conductivity, Resistivity or TDS Controller - 1

Conductivity, Resistivity or TDS Controller CDCN-961 U enu-Driven Programming M U NEMA 4X (IP65) Protection U rogrammable High/Low, P and Alarm Relays U Dual Backlit LCD U alibration Reminder C Via Alarm Relay Setting U solated 0.4 to 20 mA Output I U RS485 Output Applications U Waste Water Treatment U Power Plants U Thermo-Electric Plants U Pharmaceutical U Photographic Industries U Soft Drink Industries CDCN-961 with CDE-961 probe/cell (included), shown smaller than actual size. TDS Range: 0.000 to 3.000, 30.00, 300.0 ppm 0.000 to 3.000, 30.00, 300.0 ppt Resolution: 0.001/0.01/0.1 μS/cm 0.001/0.01/0.1 mS/cm 0.1 MΩcm Accuracy: ±1% FS Temperature Range: -0.5 to 130ºC (31.1 to 266ºF) Temperature Resolution /Accuracy: 0.1ºC/ ±0.5ºC Cell Constant: K = 0.01, 0.1, 1, 10 Line Resistance Compensation: 0.0 to 20.0 Ω Temperature Sensor: Pt1000 Signal Output/Load: 0/4 to 20 mA/600Ω Output Interface: RS485 Relay Specification: 3 SPST/250V 1A Control Hysteresis Band: 0.1 to 10% FS Frequency of Cleaning Time: 1 to 999 hours 1 to 999 seconds EMC Standard: EN 50081-1/EN 50082-1 Operation Temperature: -10 to 50ºC (14 to 122ºF) Operation Humidity: 10 to 95% Housing: NEMA 4X (IP65) Dimensions: 100 W x 108 L x 136 Dia mm (3.93 x 4.25 x 5.35") Panel Cutout: 93.5 L x 93.5 W mm (3.68 x 3.68") Weight: 1650 g (58 oz) Accessory: Conductivity Electrode: K=1.0 Material: PPS/graphite Test Range: 0 to 50.0 mS/cm Temperature Range: 0 to 80ºC (32 to 176ºF) Temperature System: Pt1000 Cable: 5 m (16.4') The CDCN-961 conductance, resistance or total dissolved solids (TDS) controller is designed for inline monitoring of process solutions and water applications. The CDCN-961 has simple menu driven programming for easy setup. Available relays can be programmed for control, alarm or as a calibration reminder. The transmitter output is also programmable from the keypad eliminating the need for potentiometer or dip-switch settings. The calibration function automatically recognizes the buffer solution resulting in a simple and straight forward system calibration. Conductivity Range: 0.000 to 3.000, 30.00, 300.0 μS/cm 0.000 to 3.000, 30.00, 300.0 mS/cm Resistivity Range: 0.3 to 30.0 MΩcm 3 to 300 MΩcm CDCN-961 Conductivity resistivity TDS controller Replacement probe/cell Comes complete with probe/cell and operato

Open the catalog to page 1