Catalogs >
OMEGA >
Complete Wireless Thermocouple Connector System

Complete Wireless Thermocouple Connector System
2Pages

Catalog excerpts

Complete Wireless Thermocouple Connector System - 1

Complete Wireless Thermocouple Connector System The Smart Connector™ nal Additio ers Receiv le Availab ustry FCC/Ind SRRC a, Canad oved Appr Plug Y Smart C our Probe Int oa onne a Smart ctor to Make Sensor! Wireless connector. Bumper BandTM Thermocouple input. U ser Configurable for Type J, K, T, E, U R, S, B, N, C Thermocouple Input U ree Downloadable Software Converts F Your PC Into a Multi-Channel Chart Recorder or Data Logger U CC Compliant (All Models) F U uilt-In Cold Junction Compensation B and Linearization U nique Design Accepts Both Miniature U and Standard Size Probes and Connectors U ne Receiver Works with Multiple O Wireless Remote Connectors U ow Power Operation and Sleep Mode L for Long Battery Life U ireless Connector Transmits W Thermocouple Temperature, Ambient Temperature, Signal Strength and Battery Status in Real-Time U nterfaces with Model UWTC-REC1 for I Multi-Channel PC Chart Recording and Data Logging or Model UWTC-REC2 (Single Channel Industrial Transceiver with Analog Output and Alarm) Omega’s wireless thermocouple connector features stand-alone, compact, battery powered thermocouple connectors that transmit their readings back to a host receiver up to 120 m (400') away. Each unit can be programmed in the field to work as a Type J, K, T, E, R, S, B, N or C calibration connector. When activated the connector will transmit readings continuously at pre-set time interval that was programmed by the user during the initial setup. Each unit measures and transmits: Thermocouple Input Reading, Connector Ambient Temperature, RF Signal Strength and Battery Condition to the host and is displayed on the PC screen in real-time using the downloadable software. When used with host receiver UWTC-REC1 data from up to 48 wireless thermocouple connectors can be received and displayed. Each unit includes free downloadable software that converts your PC into a strip chart recorder or data logger so readings can be saved and later printed or exported to a spread sheet file. When used with host transceiver UWTC-REC2 wireless data from one connector can be re-transmitted out of the receiver by a wired connection as an analog voltage, current or thermocouple signal to interface with a controller, PLC or data acquisition board. UWTC-REC receivers work with up to 48 UWTC transmitters, and displays/logs the data to your PC or network. Sold separately. d Downloa al entr TC C re Softwa

Open the catalog to page 1

Complete Wireless Thermocouple Connector System - 2

Wireless connectors convert your thermocouple or RTD to a wireless signal. TA4F mating connector (one included) Thermocouple input. (Complete specifications available online) UWTC Input: J, K, T, E, R, S, B, C or N; software selectable UWRTD Input: 100 Ω Pt RTD; 0.00385 or 0.00392 curve; software selectable Measurement Range: J: -100 to 760°C (-148 to 1400°F) K: -100 to 1260°C (-148 to 2300°F) T: -200 to 400°C (-328 to 752°F) E: -200 to 1000°C (-328 to 1832°F) R: 260 to 1760°C (500 to 3200°F) S: 260 to 1760°C (500 to 3200°F) B: 870 to 1820°C (1598 to 3308°F) C: 0 to 2315°C (32 to 4200°F) N:...

Open the catalog to page 2