Catalogs >
OMEGA >
CDTX90

CDTX90
6Pages

Catalog excerpts

Conductivity Transmitters Electronics Only ߜ Display in µS, mS, kΩ, MΩ, ppm (TDS) ߜ Simulate Function ߜ Programmable Temperature Compensation ߜ Relay Options ߜ Dual Output Option Allows Temperature and Process Signal Transmission ߜ 2 x 16 Character Dot Matrix LCD ߜ Chemical Resistant Enclosure and Self-Healing Window ߜ Large Pushbuttons ߜ Clearly Marked Terminal Labels Applications ߜ RO/DI System Control ߜ Rinse Tank Control ߜ Cooling Tower, Scrubber or Blowdown Control ߜ Environmental Study (TDS) ߜ Desalination Monitor ߜ Water Quality Monitoring ߜ Leak Detection ߜ Chemical Concentration The CDTX-90 Series Conductivity/ Resistivity Transmitter is designed for broad application and ease of setup and use. The unit can be used for conductance, resistance, or TDS signal transmission and display. Mounting can be accomplished in several options best tailored to your application requirements. Full microprocessor based electronics allow wide operating range, and long term signal stability due to the elimination or potentiometers, jumpers and dip switches. Shown larger than actual size. Enclosure: Rating: NEMA 4X (IP65) front Case: PBT Window: Polyurethane coated polycarbonate Keypad: Sealed 4-Key Silicone Rubber Weight: Approx. 325 g (12 oz) Display: Alphanumeric: 2 x 16 LCD Contrast: User selected, 5 levels Operating Temperature: -10 to 70°C (14 to 158°F) Storage Temperature: -15 to 80°C (5 to 176°F) Relative Humidity: 0 to 95% non-condensing Standards and Approvals: CSA, CE, UL listed and manufactured under ISO9001 Compatible Electrodes: OMEGA® CDCE-90-X Series Conductivity/ Resistivity Electrodes (see page E-37) Accuracy: ±2% of reading Sensor Input Range: Conductance: 0.055 to 400,000 µS Resistivity: 10 KΩ to 18.2MΩ TDS: 0.023 to 200,000 ppm Temperature: PT1000, -25 to 120°C (-13 to 248°F) Current Output: 4 to 20 mA, isolated, fully adjustable and reversible Power: 12 to 24 Vdc ±5% regulated Max Loop Impedance: 50Ω max @ 12 V, 325Ω max @ 18 V, 600Ω max @ 24 V Update Rate: 0.5 seconds Accuracy: ±0.03 mA @ 25°C, 24 V Relay Output: Mechanical SPDT Contacts: Hi, Lo, Pulse, Off Maximum Voltage Rating: 5 A @ 30 Vdc, or 5 A @ 250 Vac resistive load Hysteresis: User Adjustable Max 400 pulses/min Open Collector Output: Hi, Lo, Pulse, Off. Open collector, optically isolated, 50 mA max, sink, 30 Vdc max. pull-up voltage. Max 400 pulses/min For Sales & Service U.S.A. and Canada

Open the catalog to page 1

The transmitter is available in a panel mount or a field version. Select the universal mount kit FP90UM to mount the transmitter on a surface near the sensor. All Panel mount transmitters CDTX-90-XP include a mounting The Universal Mount Kit FP90UM can be ordered separately bracket and gasket for a NEMA 4X (IP65) watertight panel and includes a conduit base, locking ring, and universal installation. Panel mount transmitters fit into a standard !4 DIN panel adapter for mounting the transmitter on a pipe, wall, or other cutout. stationary surface. mounting bracket Conductivity/Resistivity...

Open the catalog to page 2

Conductivity Cells for CDCN-91, CDTX-90 and CDCN-5800 Series 4.6 m (15') cable (standard) Dimensions: mm (inches) Reversible fitting assembly for submersion mounting All shown smaller than actual size. CDCE-90-001, CDCE-90-01, CDCE-90-1 Cell: CDCE-90-001: 0.01 CDCE-90-01: 0.1 CDCE-90-1: 1.0 Conductivity Range: CDCE-90-001: 0.010 to 100 µS (10 KΩ to 100 MΩ) CDCE-90-01: 1 to 1000 µS CDCE-90-1: 10 to 10,000 µS Temperature Compensation: Pt1000 Wetted Materials: O-Rings: EPR Insulator Material: PTFE Electrodes: 316 SS Standard Fitting: Polypropylene Max. Pressure: 6.9 bar (100 psi) Max....

Open the catalog to page 3

Cell: CDCE-90S-001: 0.01 CDCE-90S-01: 0.1 CDCE-90S-1: 1.0 Conductivity Range: CDCE-90S-001: 0.010 to 100 µS (10 KΩ to 100 MΩ) CDCE-90S-01: 1 to 1000 µS CDCE-90S-1: 10 to 10,000 µS Sanitary Fitting Size: 1, 11/2, 2" Temperature Compensation: Pt1000 Wetted Materials: O-Ring: EPR Insulator Material: PTFE Electrodes: 316 SS or titanium Sanitary Fitting: 316 SS or titanium Maximum Pressure: 6.9 bar (100 psi) Maximum Temperature: 120°C (248°F) * Dimension shown for 1 and 11⁄2" sanitary fittings. Dimension for 2" sanitary fitting is 64 mm (2.5") CDCE-90S-001-S15, $607, shown smaller than actual...

Open the catalog to page 4

Dimensions Dimensions: mm (inches) Panel Mount Universal Mount Optional Rear Cover All panel mount transmitters CDTX-90P include a mounting bracket and gasket for a NEMA 4X (IP65) watertight panel installation. Panel mount transmitters fit into a standard 1⁄4 DIN panel cutout. The Universal Mount Kit PF90UM can be ordered separately and includes a conduit base, locking ring, and universal adapter for mounting the transmitter on a pipe wall or other stationary surface. MOST POPULAR MODELS HIGHLIGHTED! To Order (Specify Model Number) Model No. Description Conductivity/resistivity transmitter...

Open the catalog to page 5

Your One-Stop Source for Process Measurement and Control! UNITED STATES Deckenpfronn, Germany UNITED KINGDOM Manchester, England More than 100,000 Products Available! Calibrators, Connectors, General Test and Measurement Instruments, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders, Relative Humidity Measurement Instruments, PT100 Probes, PT100 Elements, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching...

Open the catalog to page 6