Catalogs >
OMEGA >
CA 150

CA 150
5Pages

Catalog excerpts

Multi-Functional Handheld Calibrator CA150 Starts at ߜ Highly Accurate Within 0.02% of the DC Voltage Range for Source and Measure ߜ Source and Measurement can be Performed Simultaneously ߜ Vertical Body with Large Screen Display ߜ Loop Power Supply ߜ Sink Function ߜ 3 Sweep Function Outputs (Step Sweep, Linear Sweep, Program Sweep) Vertical Handheld Calibrator Easy-to-hold vertical body is designed to make it intuitively easy to operate, as individual functions are accessed directly by pressing assigned keys. The main body case (sold separately) is designed to make it easy to hold the CA150 in one hand. Simultaneous Source and Measurement for Process Devices In conventional calibration applications, multiple devices such as a standard generator, dial resistor and multimeter were required. Now with a single CA150 unit, it is possible to perform operation check at regular inspection and maintenance of thermocouples, RTDs and instruments, as well as maintenance and equipment diagnosis of process devices such as transmitters, thermostats and signal converters. Loop Power Supply Function It is possible to measure generated current signals while supplying loop power 24 Vdc from a two-wire type transmitter (up to 22 mA DC). Highly Accurate and Multi-Functional Source and Measurement High Accuracy: 0.02% for the source unit and 0.02% for the measurement unit Source and Measurement Functions: DCV voltage, DC mA, ohm, Frequency and temperature (thermocouple, RTD) and 24 Vdc power supply function for transmitters Memory Functions: Setting Memory This function saves/loads setting conditions. Up to 21 data items can be stored. Settings for (source/ measurement) functions, ranges, generated values/measured values as well as setting mode conditions can be stored. Data Memory This function saves source and measure values displayed. Up to 100 data items can be stored. Storage date/time, (source/ measurement) functions, ranges and generated values/measured values can be stored. Stored data can be checked on the display of the main unit as well as via communication. Specifications (Common to Source and Measurement) Communication Functions: Serial interface RS232 D-Sub 9-pin connector Memory Functions: Data can be stored and loaded in setting memory (setting data) and data memory (source/measurement). Specifications (Common to Source Specifications) Power Supply: 6 “AA” size alkaline batteries (included), AC adaptor (sold separately) or dedicated NiMH battery (sold separately) AC Adaptor: 100 to 240 Vac, 50/60 Hz, 1.4 A K-1 CA150, $1900, shown smaller than actual size. Output: 12 Vdc, 3 A Battery Life Conditions: Simultaneous source/measurement output of 5 Vdc/10 kΩ or more Vdc Approx 8 Hours: When 6 batteries are used Approx 10 Hours: When NiMH batteries are used Auto Power-Off: Approx 10 minutes; it can be canceled by setting Insulation Resistance (Between Input Terminal and Output Terminal): 500 Vdc, 50 MΩ or more Withstand Voltage (Between Measurement Terminal and Generation Terminal): 350 Vac, 1 minute

Open the catalog to page 1

Include d! Carrying case lead cables for source/ measurement, terminal adaptor, 6 spare “AA” batteries, fuse, AC adaptor and instruction manual. Operating Temperature/Humidity Range: 0 to 40°C (32 to 104°F), 20 to 80%RH (no condensation) Storage Temperature Range: -20 to 60°C (-4 to 140°F), 90%RH or less (no condensation) External Dimensions: Approx 251 H x 124 L x 70 W mm (10 x 5 x 3") Weight: Approx 1000 g (oz) Accessories: One set of lead cables for generation, 1 set of lead cables for measurement, carrying case, terminal adaptor, and 1 (spare) fuse for measurement. Conforming Standards:...

Open the catalog to page 2

Source Unit Range Resolution Source Range 100 mV 1uV 0 to ±110.000 mV 1V 10uV 0 to ±1.10000V DC Voltage 10V 30V DC Current 20 mA 20 mA mA SINK SINK 500Ω Accuracy Remark ±(0.02%+10uV) Output resistance: approx. 6.5Ω ±(0.02%+0.05mV) Maximum output: 10 mA, output resistance: approx. 30 mΩ ±(0.02%+0.5mV) Maximum output: 10 mA, output resistance: approx. 30 mΩ ±(0.02%+10 mV) Maximum output: 10 mA ±(0.025%+3uA) Maximum load: 24V ±(0.025%+6uA) External power supply: 5 to 28V Frequency/ Pulse Excitation current is: In the case of 0.1 mA to 1 mA or less, {0.05/ls (mA)} (Ω) or add {0.12/ls (mA)} (°C)...

Open the catalog to page 3

Measurement Unit Measurement Range Resolution Range 500 mV 10uV 0 to ±500.00 mV DC Voltage 5V 0.1 mV 0 to ±5.0000V 35V 1 mV 0 to ±35.000V 20 mA 1 uA 0 to ±20.000 mA DC Current 100 mA 10 uA 0 to ±100.00 mA 500Ω 0.01Ω 0 to 500.00 OHM 5kΩ 0.1Ω 0 to 5.0000k 50kΩ 1Ω 0 to 50.000k PT100 0.1°C -200.0 to 850.0°C RTD JPT100 0.1°C -200.0 to 500.0°C -200.0 to 1372.0°C -200.0 to 1000.0°C -200.0 to 1200.0°C UU W 0.1°C -200.0 to 400.0°C Thermocouple -200.0 to 1300.0°C UU W -200.0 to 900.0°C U U U WW U -200.0 to 400.0°C UU UU W 0 to 1768°C 1°C 0 to 1768°C UU W 600 to 1800°C UU W 100 Hz 0.01 Hz 1.00 to...

Open the catalog to page 4

Your One-Stop Source for Process Measurement and Control! UNITED STATES Deckenpfronn, Germany UNITED KINGDOM Manchester, England More than 100,000 Products Available! Calibrators, Connectors, General Test and Measurement Instruments, Handheld Instruments for Temperature Measurement, Ice Point References, Indicating Labels, Crayons, Cements and Lacquers, Infrared Temperature Measurement Instruments, Recorders, Relative Humidity Measurement Instruments, PT100 Probes, PT100 Elements, Temperature & Process Meters, Timers and Counters, Temperature and Process Controllers and Power Switching...

Open the catalog to page 5