144 OMEGA AIR: Compressed Air and Gas Treatment RC-DRY series REGENERATION BY HEAT OF COMPRESSION - FULL STREAM 4 to 11 bar operating pressure 140to200°c inlet air temperature range -20°c pressure dew points 390 to 20.200 Nm3/h flow rate 0% avg. comp, air consumption DESCRIPTION RC-DRY adsorption dryers have been designed for continuous separation of water vapour from compressed air thus reducing dew point. Operation of dryer requires two columns operated alternately. Heat of compression dryers do not need any additional source of energy to regenerate the adsorbent as they fully or partially utilise the heat generated during compression of the air in the compressor. Adsorption as well as regeneration take place under pressure meaning no compressed air is wasted for depressurisation. A dryer consists of two columns, filled with desiccant beads, water cooled heat exchangers, controller with LCD display, valves, manometers, and support construction. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance. (superfine coalescing) F2 outlet filter (dust) VI-6 ball valve with pneumatic actuator V7-10 angle seated valve with pneumatic actuator CV1-2 check valve C1-2 water cooled heat Adsorption Regeneration Adsorption Regeneration APPLICATIONS • Compressed air systems

TECHNICAL DATA RC-DRY 400 OPERATING TEMPERATURE - CORRECTION FACTORS - (1) Refers to 1bar(a) and 20°C at 7 bar operating pressure, inlet temperature 3B“C and pressure dew point at outlet -40°C w Refers to dryer inlet and outlet connection without filters