R-DRY BP COOLING WITH PURGE 4 to 11 bar operating pressure 1,5 to 42,5-c inlet air temperature range -40 °c pressure dew points 390 to 20.200 Nm3/h flow rate 2-3% avg. comp, air consumption DESCRIPTION R-DRY BP 400-20000 adsorption dryers are designed for continuous separation of water vapour from compressed air thus lowering the dew point. R-DRY BP dryers have two columns that operate alternately. Adsorption takes place under pressure in the first column while the second column regenerates (heated ambient air for desorption + expanded dry compressed air purge for cooling). BP type of dryer is suitable for applications where low PDP is required at hotter and more humid ambient conditions and where compressed air can be utilised for cooling. A dryer consists of two columns, filled with desiccant beads, a blower, heater, controller with an LCD display, valves, manometers, and a support construction. A proven and robust design enables efficient and reliable operation, fast installation and simple maintenance. (super fine coalescing) F2 outlet filter (dust) VI-6 ball valve with pneumatic actuator V7-10 angle seated valve with pneumatic actuator CV1-2 check valve TT1-4 temperature transducer PI1-2 pressure indicator

A-DRY 400 BP R-DRY 600 BP R-DRY780 BP R-DRY 1000 OP R-DRY 1200 BP R-DRY 1600 DP R-DRY 2000 OP R-DRY 2500 OP R-DRY 3000 OP R-DRY 3600 OP R-DRY 4100 OP R-DRY 5000 BP R-DRY 6500 BP R-DRY 7700 BP R-DRY 10000 BP R-DRY 12000 BP R-DRY 14000 BP R-DRY 16000 BP R-DRY 18000 BP R-DRY 20000 BP OPERATING PRESSURE - CORRECTION FACTORS - C Operating pressure [bar] Operating pressure [psi] Correction factor OPERATING TEMPERATURE - CORRECTION FACTORS - C^ 1,1 Refers to 1 bar(a) and 20 “C at 7 bar operating pressure, inlet temperature 35 "C and pressure dew point at outlet -40 °C 121 Refers to dryer inlet and outlet...