Mechanical condensate drains CONDENSATE DRAINSProduct overview Condensate drains Condensate drain system BASIC PRINCIPLES Operat.temp. range AOK16B has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. AOK16B is easy to install inside to the filter housing. AOK16B can be used in variety of applications. For applications not listed please contact producer or your local distributor. Operat.temp. range AOK16F has been developed for fully automatic discharging of condensate or any other non-aggressive fluid from compressed air system. AOK16F is easy to install inside to the filter housing. AOK16F can be used in variety of applications. For applications not listed please contact producer or your local distributor. Operat.temp. range MCD has been developed for the discharging of condensate or any other non-aggressive fluid from compressed air system. In order to prevent condensate from becoming re-entrained in the airstream we recommend controlling the condensate level in filter bowl, which requires an automatic drain trap. MCD is easy to install on the filter housing. MCD can be used in variety of applications. Operat.temp. range MCD-B has been developed for manual discharging of condensate or any other non-aggressive fluid from compressed air system. MCD-B is easy to install on the filter housing. Condensate can be drained only manually. MCD-B is closed even if the system is non-pressurized. MCD-B can be used in variety of applications. _ AOK20 "automatic mechanical condensate drain TD M timer controlled condensate drain AOK16B automatic condensate drain AOK 20B is designed for automatic condensate draining from filters, pressure vessels and cyclone separators. It allows draining of large condensate quantities (up to 300 l/h) and the operation up to 20bar. Due to condensate lever rising, a float in aluminium housing opens an aperture and release the condensate to drain pipe. Discharge valve automatically closes when condensate level falls and prevents the compressed air to discharge from the system. The condensate is collected in a suitable container. The opening times of solenoid valve are controlled by electronic in plastic housing. The valve opening time can be adjusted according to the system needs and depending on the determined quantity of condensate. Adjustable opening times of the electromagnetic valve ensure complete draining of condensate. AOK 16B is designed primarily for installation in filters. Its task is to automatically drain the condensate, but it also contain a manual drain, which has also the option of the automatic operation checking. A float opens and releases the condensate from the system. OMEGA AIR ECD-B electronic condensate drain electronic condensate drain EMD electronic condensate drain The principle of operation is based on non-contacting measurement of accumulated condensate level and its draining without loss of valuable compressed air. Condensate accumulates in the bottom of filter housing. Fluid level is detected by precise capacitive level sensor. When the level is high enough condensate is being discharged from the system without any air losses. omeGR Condensate level is detected by sensitive electronics. ECD Series is made of robust aluminium housing and plastic cover that protects the sensitive electronics in the device against external harmful influences. The series is designed to discharge condensed water from filter housing primarily. EMD series principle of operation is based on non-contacting measurement of accumulated condensate level and its draining without loss of valuable compressed air. Series is made of plastic, but the operating principles are the same as at ECD series.

Condensate drains EMD SERIES ECD-B SERIES electronic condensate drain electronic condensate drain operating pressure operating pressure Since water moisture is a part of atmospheric air, condensate in compressed air systems can’t be avoided. During the compression process, the air is heated. It cools down as it passes through hoses, valves and piping. As it approaches the ambient temperature, vapour condenses to liquid and can be removed by mechanical separation. As the air cools further, more condensate is present. Water moisture is not the only undesirable substance. There are also other pollutants...