A-DRYTAC sERIESADSORPTION COMPRESSED AIR DRYERS WITH ACTIVATED CARBON TOWER 4 to 16 bar operating pressure 1,5 to 50 °c inlet air temperature range -40°c(-25°c / -70 °c) pressure dew points 6 to 200 NmVh flow rate RAL 5012 standard colour 15-20% avg. comp, air consumption DESCRIPTION A-DRY 6-200 TAC desiccant adsorption dryers with integrated activated carbon tower are designed to achieve low pressure dew point as well as to remove oil vapours and odours from the compressed air. A-DRY is a range of products offering our customers a wide array of dried air solutions with volumetric flow rates ranging from 6 Nm7h to 200 Nm3/h. An innovative design of A-DRYTAC adsorption driers, developed with consideration of our customers, enables fast and reliable installation, use and servicing. Installation is simple with our ready to use controller while minimising the number of parts and motions required for assembly and disassembly makes servicing fast and reliable. A-DRYTAC has integrated activated carbon tower, which is developed for separating oil vapours from compressed air (dry type separation). APPLICATIONS • Compressed air systems Wide range of products to fit your need. Robust and intuitive ready to use controller. Simple assembly and disassembly. Fast and reliable servicing. Adsorbent in cartridges. Standard version includes coalescing prefilter and particle afterfilter.

Operating pressure range 111 Refers to 1 bar(a) and 20 "C at 7 bar operating pressure, inlet temperature 35 "C and pressure dew point at outlet -40 *C. 121 Outlet flow refers to typical assumption during regeneration phase for operating at nominal inlet flow conditions. Outlet flow includes average air losses of approximately 17,3 %. * If dryer is supplied without inlet filter compressed air class 1 (150 8753-1) for solid particles and oil should be provided to the inlet of the dryer. CORRECTION FACTORS-FI