A-DRY BI/BM SERIES HEATLESS REGENERATION ADSORPTION COMPRESSED AIR DRYERS 4 to 16 bar operating pressure 1,5 to 50 °c inlet air temperature range -40°c(-25°c / -70 °c) pressure dew points 6 to 200 NmVh flow rate RAL 9003 standard colour 15-20% avg. comp, air consumption DESCRIPTION A-DRY BI/BM desiccant adsorption dryer has been designed to separate water moisture from compressed air thus reducing the dew point in the system. A-DRY BI/BM is a range of products offering our customers a wide array of dried air solutions with volumetric flow rates ranging from 6 Nm7h to 200 Nm7h. An innovative new design of A-DRY BI/BM adsorption driers, developed with consideration of our customers, enables fast and reliable installation, use and servicing. Installation is simple with our ready to use controller while minimising the number of parts and motions required for assembly and disassembly makes servicing fast and reliable. ADVANTAGES APPLICATIONS • Compressed air systems Wide range of products to fit your need. Robust and intuitive ready to use controller. Simple assembly and disassembly. Fast and reliable servicing. Adsorbent in cartridges. Standard version includes coalescing prefilter and particle afterfilter.

TECHNICAL DATA A-DRY OS BI/BM A-DRY12 BI/BM A-DRY 24 BI/BM A-DRY 3G BI/BM A-DRY SO BI/BM A-DRY 75 BI/BM A-DRY 105 BI/BM A-DRY 150 BI/BM A-DRY 200 BI/BM Nominal volume flow Operating pressure range 111 Refers to 1 bar(a) and 20 "C at 7 bar operating pressure, inlet temperature 35 "C and pressure dew point at outlet -40 *C. 121 Outlet flow refers to typical assumption during regeneration phase for operating at nominal inlet flow conditions. Outlet flow includes average air losses of approximately 17,3 %. * If dryer is supplied without inlet filter compressed air class 1 (150 8753-1) for solid particles...