Catalogs >
OMAX >
Tilt-A-Jet Specsheet

Tilt-A-Jet Specsheet
1 / 2Pages

Catalog excerpts

OMAX Tilt-A-Jet The industry’s premier precision abrasive cutting head, the Tilt-A-Jet® lets the OMAX JetMachining® Center achieve virtually zero taper with most materials. The Tilt-A-Jet positions the nozzle at a precise angle calculated by the industryleading Intelli-MAX® software to exactly offset the natural taper from the abrasivejet. Taper doesn’t disappear. It is moved to the scrap part of the material, leaving your part with square, taper-free edges. The Tilt-A-Jet can be retrofitted to any OMAX machine, enabling precise taper-free machining for all JetMachining System owners. Once installed, there is no additional effort on your part, just press start and the Tilt-A-Jet does all the work automatically to produce taper-free high precision parts. Even squaring the Z-axis so it is exactly perpendicular to the slats is done in seconds with a single click in the Intelli-MAX software. The Tilt-A-Jet is the ideal solution for your taper-free machining needs. FEATURES & BENEFITS • Easily make interlocking pieces, dovetail fittings, and lead ins without taper to reduce secondary machining • Tilting point positioned at material surface to reduce X-Y motion • Easy to use, with no special programming required • ontinuously adjusts at thousands of points per inch along path C • Can be used on OMAX machines from the 2626 to the 160X • utomatic re-squaring feature ensures nozzle is square to the table A • bility to change angles quickly, further enhancing cutting speed A The OMAX Technology Guarantee entitles you, as the original owner, to free OMAX software upgrades for the life of the machine. • ompatible with Precision Optical Locator and Rotary Axis C • Faster cutting of high precision taper free parts with no need to slow down to eliminate taper • Servo-controlled programmable precision Z-axis with 6” of travel • Faster cutting due to “tilt forward” capability • Advanced servo design results in virtually zero backlash • Programmable manual tilt up to ±9° for the maximum tilt angle • Automatic taper elimination without any programming

Open the catalog to page 1

TILT-A-JET Standard Cutting Head Tilt-A-Jet Cutting Head Taper Free Taper is the inherent difference in the width of the cut from top to bottom found in all abrasive waterjets. There are several types of taper found in cutting. The V-shaped taper is the most common, where the top of the cut is wider than the bottom. Reverse taper is often found in soft materials, where the bottom is eroded more than the top. In very thick materials, barrel taper can occur where the middle is wider than both the top or the bottom. Many factors affect taper, including material type and thickness, abrasive...

Open the catalog to page 2