Catalogs >
OMAX >
OMAX Reserve Osmosis System

OMAX Reserve Osmosis System
2Pages

Catalog excerpts

ADVANCED ABRASIVE WATERJET ACCESSORIES OMAX Reverse Osmosis System Water quality varies depending on location. In some areas, total dissolved solids (TDS) can be sustained at or below 250 parts per million (ppm), eliminating pre-treatment measures for effective abrasive waterjet operation. However, in areas where the TDS is in excess of 250 ppm, an OMAX Reverse Osmosis System can provide the assurance you need to supply clean, pure water to your high performance abrasive waterjet system. Optimized for waterjet applications and designed to fit between your incoming water supply and the abrasive waterjet pump, the OMAX Reverse Osmosis System works with both OMAX and MAXIEM JetMachining Centers. • Two types of pre-treatment filters: 5-micron and carbon black • Includes a digital total dissolved solids meter for quick visual review • Time clock initiated water softener system capable of a 10 gpm flow rate with 45,000 grains removed • Sturdy powder-coated steel frame designed for out of the way wall mounting • Two 4” x 40” membranes capable of handling over 4,000 gallons per day at 77 psi • Can remove up to 90% of total dissolved solids in water • Protects OMAX and MAXIEM abrasive waterjet systems to maximize machine uptime • Virtually hands-free operation • Excess pure water output can be used for other equipment in a shop (such as EDM, etc.) • Inexpensive monthly filter changes

Open the catalog to page 1

City Water Feed (60 psi) Pure Water Output Reverse Osmosis Filter Drain Output 5 micron Carbon Block Filter 5 micron Sediment Filter WHAT IS REVERSE OSMOSIS During natural osmosis, water flows from a less concentrated solution through a semi-permeable membrane to a more concentrated saline solution until concentrations on both sides of the membrane are equal. Power Requirements Overall: 18”H x 38”W x 6”D Resin Tank: 10” x 54” Brine Tank: 18” x 30” Pre-Treatment Filters Max operating pressure: 125 psi Feed temperature: 95° Recommended pH: 6 to 12 Free chlorine tolerance: <0.1ppm Average...

Open the catalog to page 2