Catalogs >
OMAX >
80X Series

80X Series
2Pages

Catalog excerpts

PRECISION ABRASIVE WATERJET SYSTEMS OMAX 80X SERIES JETMACHINING CENTER The OAAAX 80X Series is a robust and reliable abrasive waterjet system available in several length variants designed for your specific needs. The bridge-style 80X Series is ideal for cutting larger or multiple part projects in a variety of materials. The 80X Series employs the innovative patent-pending Intelli-TRAX® linear drive technology designed exclusively for the abrasive waterjet environment, ensuring superior accuracy and high durability for greater productivity and profitability. Highest cutting speeds and best precision compared to any abrasivejet in the industry and is backed by our exclusive Intelli-MAX® Software with real world cutting data Programmable Motorized Z-Axis with a precision OMAX MAXJET®5i Nozzle Assembly can boost cutting productivity and process efficiency Increase machining capacity with optional DualBRIDGE system Low maintenance, high reliability scissor-style hard plumbing Drive system sealed against water, dirt, and grit. High efficiency Generation 4 EnduroMAX pump systems available in 30, 40, and 50 hp with operating pressures up to 60,000 psi Rapid Water Level Control for quiet and clean submerged cutting Bulk Abrasive feed Assembly transports garnet from the assembly's large hopper into the Zero Downtime Hopper located at the Motorized Z-Axis Shipped pre-assembled and factory-tested Machines a wide range of materials and thicknesses, from metals to glass Does not create heat-affected zones or mechanical stresses No tool changes and minimal fixturing reduces setup by 50% or more No additional water required for pump cooling Small, efficient footprint for minimal floorspace utilization Leaves behind a satin-smooth edge, reducing secondary operations No noxious gases, liquid and oils used in, or caused by, the machining process EnduroMAX pump technology delivers the highest nozzle horsepower in the industry for faster and more efficient cutting Completes most work below 80 dBA at one meter for submerged cutting Environmentally "green" system with quiet and clean operation with low electrical consumption OMAX. Corporation is approved by Underwriters Laboratories (UL) to apply the cilLus Listed Mark to industrial control panels built by OMAY.. at their Kent, WA facility per UL 508A, CAN/CSA C22.2 No. 14, and CAN/CSA C22.2 No. 73. The cilLus Listed Mark designates products evaluated by UL and approved for use in the United States and Canada.

Open the catalog to page 1

80X SERIES MACHINE DIMENSIONS STANDARD MODEL SPECIFICATIONS Footprint (with controller) Weight (tank empty) Height (with scissor plumbing) Operating Weight (with water in tank) Material Support Slats Maximum Supported Material Load 400 lbs/sq ft (1,950 kg/sq meter) Electrical Requirements Noise Level Below 80 dBA at one meter for submerged cutting 180 in/min to 350 in/min (4,572 mm/min to 8,890 mm/min) WORK ENVELOPE X-Y Cutting Travel* Table Size • Intelli-TRAX® drive technology with linear encoders in X-Axis • recise Motorized Z-Axis P • nduroMAX Pump P3060V, E P4060V, or P5060V • ualPUMP...

Open the catalog to page 2