ROTARY AXIS OMAX Rotary Axis The Rotary Axis is a robust, water resistant submersible rotary head that allows the abrasive waterjet to cut 6-axis* paths to create complex 3D shapes in tube, pipe, and bar stock. Constant rotational control allows for continuous cutting around a shape. Advanced software features in the Intelli-MAX Software Suite grant the ability to cut complex shapes and angles when used in conjunction with the A-Jet® articulated cutting head. Precision indexed rotations offer accurate cutting of multi-faceted shapes and other geometric-shaped materials. The Rotary Axis can be mounted on any OMAX JetMachining® Center, significantly expanding the cutting capabilities. *6-axis cutting requires A-Jet or Tilt-A-Jet® FEATURES & BENEFITS •   Fully submersible rotary head •   Multiple mounting features on output shaft including external and internal threads, flanges, and locating shoulders •   Powered by OMAX common table control •   Flexible positioning of the mounting and supports •   Easy maintenance with external grease fittings •   Built-in water drip sensor, warning lights, and shutdown •   Incremental or coordinated continuous rotation •   Rapid height adjustment wheel on High Torque Rotary Axis •   Provides the ability for submerged cutting, leading to a cleaner and quieter process •   Robust standard ACME and metric threads allow customers to adapt custom work holding fixtures •   Can be relocated at various positions of the table, permitting sheet cutting and rotary cutting without removing the rotary head •   Combines precision of abrasive waterjet and rotary head technologies •   Opens up more design capabilities •   No heat-affected zones when cutting metal materials

ROTARY AXIS When used with the A-Jet, fishmouth intersections, saddle cuts, and countersunk holes can be cut along the circumference of pipes. CAPABILITIES •   10,000 steps per revolution standard •   Maximum radial load at end of output shaft 391 lbf (1.74kN) •   Maximum radial load 12” from end of shaft 67 lbf (0.289kN) •   Maximum radial load 24” from end of shaft 36 lbf (0.164kN) •   On larger format machines, maximum diameter 24” (cannot exceed load or torque limit) •   0.01 degree of repeatability: at 1” diameter = 0.0001”; at 10” diameter = 0.0008” •   XYZ and A axes with standard motorized...