Established in 1952, OMAV is now a leader in the production of extrusion systems, starting from the concept phase to the final product. All extrusion plant equipment is engineered, built and installed completely by OMAV. Using the latest and most modern technologies, OMAV supplies its customers with more than just machines: we are offering solutions for state-of-the art production facilities. In over fifty years of experience, cooperation with some of the world’s leading extruders, OMAV has confirmed to be reliable on the entire line. HOT LOG SHEAR GENERAL PERFORMANCES OMAV. MAIN FEATURES 1 OMAV HAS ENGINEERED AND BUILT HOT LOG SHEARS UP TO 16” WITH A SHEARING FORCE OF 450 T 2 THE SHEARING IS HORIZONTAL 3 IT’S FORESEEN A SYSTEM WITH MOVABLE KNIVES TO FACILITATE THE INTRODUCTION OF THE LOG INTO THE BODY SHEAR 4 OPTIMIZATION OF THE CYCLE THROUGH A SOFTWARE THAT ALLOWS TO USE THE PRE CUT LOGS WITHOUT CHANGING THE TOOLS 5 REDUCTION OF THE SHEARING TIME THANKS TO THE SYSTEM OF AUTO MEASUREMENT OF THE LOG 6 SPECIAL CYCLE FOR HARD ALLOY AND PRECUT BILLETS

OMAV. QUALITY 1 IMPROVEMENT OF THE QUALITY OF THE CUT SURFACE THANKS TO THE KNIVES THAT DURING THE CUT ARE ALWAYS IN CONTACT WITH THE LOG 2 NO SCRAPS THANKS TO DOUBLE CUT AND PARKING SYSTEM 3 LUBRICATION SYSTEM IN THE CUTTING ZONE 1 STIFFENED PACKINGS TO AVOID LACKS OF OIL ON THE LOG 2 BRONZE SLIDING BLOCKS AND GUIDES WITH FORCED LUBRICATION 3 KNIVES WITH OPTIMIZATION OF THE CUTTING ANGLE 4 THERMAL TREATMENT OF THE KNIVES TO IMPROVE THE DURATION OF THE MEAN LIFE □ MAV OMAV S.p.A. 25050 Rodengo Saiano (BS) Italy Via Stacca, 2 Tel. + 39 030 681621 Fax + 39 030 6816288 e-mail: [email protected] OMAV...