OMAL S.p.a. Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited: € 500.000,00 BALL VALVES Thor Split Body Stainless steel PN 16-40 ANSI 150-300 featu res featu res & benefits d iag rams and break away torq u e d imensions and materials shaft extension d rives Features STANDARD FEATURES Floating ball, full bore Soft-seat seal TFM 1600 Standard for connecting flanges: EN 1092-1 ed. 2008; ANSI B16.5 Operating temperature see temperature pressure diagram Pressure class: PN16-40 - ANSI 150-300 Intercepted fluid: air, water, gas, petroleum and petrochemical products, aggressive fluids Antistatic device EN12662-2 Stem seal: TFM 1600 V-ring packing Additional seal on stem with FKM O-ring Anti Blow-out stem Actuator connection as per standard ISO 5211 Closing angle >7° SPECIAL FEATURES ON REQUEST For other flange types please contact our sales department. Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department PTFE cavity filler seat Mono-directional version with pressure-relief hole in the ball Stainless steel lever Stainless steel Stem nuts and springs For special versions in materials different from the standard (body, ball, stem), please contact our sales department. CERTIFICATIONS In compliance with European Directive 97/23 EC PED In compliance with ATEX 94/9/CE Directive (on request) Fugitive Emission UNI EN ISO 15848:2006 TA-LUFT VDI 2440:2000 Be environmentally friendly...please don't print this document unless you really need to.

FIRE SAFE: API 607:2005/ISO 10497:2010 - API6FA:1999 API 6D: certificate no 6D-1007 only for valves with ANSI face to face ENGINEERING STANDARDS Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN 12516 API 6D Materials and rating in compliance with ASME B16.34 for ANSI valves and EN 12516 for PN valves Be environmentally friendly...please don't print this document unless you really need to.

Features & benefits Antistatic device (electrical continuity between ball, stem and body) Static electricity is avoided which can cause sparks and fire in an inflammable/explosive environment Contact safety throughout the entire life of the valve Less Break Away Torque is granted Double antifriction washer "V" seals pack; 3 seals + o-ring It ensures a perfect tightness even after a high number of cycles Spring washer on the shaft seal Guarantee of the recovery of the gap due to the wear caused by the rotational movement of the shaft avoiding leakage towards the outside part. Less wear comparing...

Diagrams and break away torque Temperature/pressure diagram for carbon steel valve BREAK AWAY TORQUE IN Nm WITH TFM 1600 SEAT AND WATER INTERCEPTED FLUID (*) size (*): If not lubricated fluids and/or fluids containing solid particles are intercepted, torques could be higher than those in the table. Torque can vary depending on temperature and type of fluid, a safety factor 1.4 must be applied. Torque can drop on high frequency of operation. The sizing of pneumatic actuators has been done considering a minimum supply pressure of 5,6 barg. Be environmentally friendly...please don't print this document...

DIMENSIONS TABLE SIZE Be environmentally friendly...please don't print this document unless you really need to.

DIMENSIONS TABLE Be environmentally friendly...please don't print this document unless you really need to.

MATERIALS TABLE A105 Carbon steel body LF2 Carbon steel body Body-connector gasket Stem lower sealing Chevron rings Stem o-ring Packing gland ring Carbon steel galvanized (x) (1) Carbon steel galvanized (x) (1) Be environmentally friendly...please don't print this document unless you really need to.

(.): Other materials available on request A Be environmentally friendly...please don't print this document unless you really need to.

Shaft extension WELDED SPINDLE EXTENSION WITH LEVER MATERIALS TABLE PART. N° Be environmentally friendly...please don't print this document unless you really need to.

galvanized carbon steel (*) Holder Lever galvanized carbon steel (*) Holder screw (*): On request available in Aisi 304 s.s. (**): No available on valves with Iso connection F04 DIMENSIONS TABLE ISO NOTE: Code of the spindle extension depending from drive’s type and valve’s connection; to be requested at the order” SPINDLE EXTENSION FOR ACTUATORS Be environmentally friendly...please don't print this document unless you really need to.

NOTE: Dimensions depending from valve’s connection NOTE: Dimensions depending from actuator’s size MATERIALS TABLE PART. N° Prolunga Extension Bussola Bush O-RING O-RING NOTE: Code of the spindle extension depending from drive’s type and valve’s connection; to be requested at the order” Be environmentally friendly...please don't print this document unless you really need to.

Drives - Bare shaft and lever STAINLESS STEEL BARE SHAFT (V__) AND LEVER (L__) OPERATED VALVE CODE size F51 Duplex Stainless steel Be environmentally friendly...please don't print this document unless you really need to.

^ Be environmentally friendly...please don't print this document unless you really need to.

Drives - Double acting pneumatic actuator Item codes in F304 AND F316 STAINLESS Steel Be environmentally friendly...please don't print this document unless you really need to.

Item codes in F51 STAINLESS Steel F51 DUPLEX STAINLESS STEEL Item codes in F304 AND F316 STAINLESS Steel Be environmentally friendly...please don't print this document unless you really need to.

Item codes in F51 STAINLESS Steel F51 DUPLEX STAINLESS STEEL Be environmentally friendly...please don't print this document unless you really need to.

^ Be environmentally friendly...please don't print this document unless you really need to.

Drives - Spring return pneumatic actuator Item codes in F304 AND F316 STAINLESS Steel Be environmentally friendly...please don't print this document unless you really need to.