Catalogs >
OMAL Spa >
ITEM 115 - 2-way full-bore flat body flanged

ITEM 115 - 2-way full-bore flat body flanged
1 / 8Pages

Catalog excerpts

ITEM 115 - 2-way full-bore flat body flanged - 1

OMAL S.p.a. Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited: € 500.000,00 BALL VALVES Brass ball valve ITEM 115 - 2-way full-bore flat body flanged featu res d iag rams & break away torq u e cod es and d imensions d rives Features GENERAL FEAUTERS Flanges according to: EN1092-1 PN16 Working temperature: -from -20°C to +150°C for fluid -from -20°C to +60°C for gas. Working pressure: 16 bar see diagram. Fluid range: water, air, gas, petroleum and petrochemical products. Not suitable for aggressive media. ISO 5211 connection to actuators. ON REQUEST For other applications, please contact our technical department. Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 1

ITEM 115 - 2-way full-bore flat body flanged - 2

Diagrams & break away torque PRESSURE / TEMPERATURE DIAGRAM FLOW-PRESSURE LOSS DIAGRAM AND Kv NOMINAL COEFFICIENT. Kv is the coefficient, expressed in rrr/h (with water at 15°C) causing a pressure loss of 1 bar. BREAK AWAY TORQUES Nm ^ Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 2

ITEM 115 - 2-way full-bore flat body flanged - 3

Torque can vary depending on temperature and type of fluid; a safety factor of 1.4 must be applied. Torque can drop on high frequency of operations. The actuator/valve sizing, indicated on the following pages, are based for valves to be used with liquids or gaseous fluids, clean, and for medium temperatures. For further information, or different uses please contact our technical department. Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 3

ITEM 115 - 2-way full-bore flat body flanged - 4

Codes and dimensions 115 VALVE CODES IN STANDARD EXECUTION Free shaft With lever Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 4

ITEM 115 - 2-way full-bore flat body flanged - 5

* Surface treatment: bright nickel plating DIMENSIONS Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 5

ITEM 115 - 2-way full-bore flat body flanged - 6

Drives - Double acting pneumatic actuator The sizing of pneumatic actuator has been done considering a minimum suupply pressure of 5,6 barg. Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 6