OMAL S.p.a. Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited: € 500.000,00 BALL VALVES Brass ball valve ITEM 113 - 2-way high-pressure threaded-ends reduced bore featu res d iag rams & break away torq u e cod es and d imensions d rives Features General features High pressure ball valve suitable for hydraulic and pneumatic applications, in general. Working temperature: from -20°C to + 80°C. Working pressure: 210 bar, see diagram. Fluid range: oils, petroleum and petrochemical products. Threaded ends as per UNI/ISO 7/1 Rp specifications. On request For other applications, please contact our technical department. Be environmentally friendly...please don't print this document unless you really need to.

Diagrams & break away torque PRESSURE / TEMPERATURE DIAGRAM FLOW-PRESSURE LOSS DIAGRAM AND KV NOMINAL COEFFICIENT Torque can vary depending on temperature and type of fluid; a safety factor of 1.4 must be applied. Torque can drop on high A Be environmentally friendly...please don't print this document unless you really need to. 2/8

frequency of operations. The actuator/valve sizing, indicated on the following pages, are based for valves to be used with liquids or gaseous fluids, clean, and for medium temperatures. For further information, or different uses please contact our technical department. Be environmentally friendly...please don't print this document unless you really need to.

Codes and dimensions 113 Valve codes in standard execution size Free Shaft Weight Kg. With lever Weight Kg. Seals kit Brass chromium plated Acetalic resin Be environmentally friendly...please don't print this document unless you really need to.

* Surface treatment: bright nickel plating Dimensions Be environmentally friendly...please don't print this document unless you really need to.

Drives - Double acting pneumatic actuator The sizing of pneumatic actuator has been done considering a minimum supply pressure of 5,6 barg Be environmentally friendly...please don't print this document unless you really need to.

Drives - Spring return pneumatic actuator The sizing of pneumatic actuator has been done considering a minimum supply pressure of 5,6 barg. Be environmentally friendly...please don't print this document unless you really need to.

Drives - Valve with electric acutators on request Be environmentally friendly...please don't print this document unless you really need to.