Catalogs >
OMAL Spa >
ITEM 100 - 2-way full-bore threaded-ends

ITEM 100 - 2-way full-bore threaded-ends
1 / 7Pages

Catalog excerpts

ITEM 100 - 2-way full-bore threaded-ends - 1

OMAL S.p.a. Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited: € 500.000,00 BALL VALVES Brass ball valve ITEM 100 - 2-way full-bore threaded-ends featu res d iag rams & break away torq u e cod es and d imensions d rives Features GENERAL FEATURES The valve is suitable for low pressures on condition that non aggressive fluids are used. Working temperature: from -20°C to +150°C for fluids. Working pressure: see diagram. Fluid range: water, oil, gas and light applications. Threaded ends as per UNI/ISO 7/1 Rp specifications. Head of the valve as per ISO 5211 specifications ON REQUEST For other applications, please contact our technical department. Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 1

ITEM 100 - 2-way full-bore threaded-ends - 2

Diagrams & break away torque PRESSURE / TEMPERATURE DIAGRAM FLOW/PRESSURE LOSS DIAGRAM AND Kv NOMINAL COEFFICIENT Kv is the coefficient, expressed in m3 /h (with water at 15°C) causing a pressure loss of 1 bar. BREAK AWAY TORQUES Nm size Torque can vary depending on temperature and type of fluid; a safety factor of 1.4 must be applied. Torque can drop on high frequency of operations. The actuator/valve sizing, indicated on the following pages, are based for valves to be used with liquids or gaseous fluids, clean, and for medium temperatures. For further information, or different uses please...

Open the catalog to page 2

ITEM 100 - 2-way full-bore threaded-ends - 3

Codes and dimensions 100 VALVE CODES IN STANDARD EXECUTION size Free shaft with lever Brass chromium plated * Surface treatment: bright nickel plating. DIMENSIONS Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 3

ITEM 100 - 2-way full-bore threaded-ends - 4

Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 4

ITEM 100 - 2-way full-bore threaded-ends - 5

Drives - Double acting pneumatic actuator The sizing of pneumatic actuator has been done considering a minimum supply pressure of 5,6 barg. Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 5

ITEM 100 - 2-way full-bore threaded-ends - 6

Drives - Spring return pneumatic actuator The sizing of pneumatic actuator has been done considering a minimum supply pressure of 5,6 barg. Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 6

ITEM 100 - 2-way full-bore threaded-ends - 7

Drives - Electrical actuators ON-OFF ELECTRICAL ACTUATOR (230 V ac) Model ROTARY MODULAR TYPE ELECTRICAL ACTUATOR (230 V ac) Model Items are with electrical actuator 230 v ac Atex version not available for electrical actuator Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 7