Catalogs >
OMAL Spa >
CONVERSION SR ? DA

CONVERSION SR ? DA
4Pages

Catalog excerpts

n° 8_0124 CONVERSION SR ⇒ DA OMAL S.p.A. Via Ponte Nuovo 11 - 25050 RODENGO SAIANO (BS) ITALY Tel. 030/8900145 r.a. - Fax 030/8900423

Open the catalog to page 1

All data and specifications in this manual may be changed at any time and without prior notification to improve our products. They cannot be considered binding.

Open the catalog to page 2

CONVERSION OF SPRING RETURN (SR) ACTUATOR INTO DOUBLE ACTING (DA) OMAL Double Acting (DA) pneumatic actuators differ from Spring Return ones (SR) because of the way components are assembled. As the piston slots are approx. 15 degree off the center line, the two extreme positions (completely closed or completely open pistons) yield two different torque values. Specifically actuators are required to generate the highest torque value (i.e. the highest of the two mentioned above) in the “closed valve” position (where the valve gives the highest resistance). In a DA actuator the valve closes...

Open the catalog to page 3

SECOND STEP: ROTATE THE SCOTCH YOKE AND TURN THE PISTONS UPSIDE DOWN Acting on the output shaft, give the scotch yoke a 90° rotation and then turn the pistons upside down by 180°. Rear shaft projection Scotch yoke THIRD STEP: RIASSEMBLING THE PISTONS Put the pistons back in trying to center the slots (the two pistons need to go in at the same time without using a hammer or any tool which may damage the actuator mechanism) . Rear shaft projection Scotch yoke FORTH STEP: PUT DA CAPS ON OMAL DA caps come with seals. Rear shaft projection Scotch yoke 2 Conversion SR⇒DA 2000 rif. 01 - n° 8_0124...

Open the catalog to page 4