Catalog excerpts
OMAL S.p.a. Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited: € 500.000,00 BALL VALVES Thor Split Body carbon steel ANSI 600 with reduced bore featu res featu res & benefits d iag ram d imension and material shaft extension d rives Features STANDARD FEATURES Floating ball, reduced bore. Soft-seat seal DEVLON. Standard for connecting flanges: ASME B16.5; EN1092-1. Operating temperature see temperature pressure diagram. Pressure class: ANSI 600 Intercepted fluid: air, water, gas, petroleum and petrochemical products. Antistatic device EN12662-2. Stem seal: TFM 1600 V-ring packing. Additional seal on stem with FKM O-ring. Anti Blow-out stem. Actuator connection as per standard ISO 5211. Closing angle >7°. Superficial treatment: blueing. SPECIAL FEATURES ON REQUEST LF2 carbon steel for low temperature execution (-40 C°). For other flange types please contact our sales department. Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department. Mono-directional version with pressure-compensating hole in the ball. Stainless steel lever. For special versions in materials different from the standard (body, ball, stem), please contact our sales department. Stainless steel Stem nuts and springs. Superficial treatment: white zinc coating ,epoxy coating. For other coating please contact our sales department. CERTIFICATIONS Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 1In compliance with European Directive 97/23 EC PED. In compliance with ATEX 94/9/CE Directive (on request). TA-LUFT VDI 2440. FIRE SAFE: EN ISO 10497 / API 607. API 6D:certificato n°6D-1007 only for valves with ANSI flange. ENGINEERING STANDARD Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN 12516. API 6D. Materials and rating in compliance with ASME B16.34 for ANSI valves and EN 12516 for PN valves. Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 2Features & benefits Antistatic device (electrical continuity between ball, stem and body) Static electricity is avoided which can cause sparks and fire in an inflammable/explosive environment Contact safety throughout the entire life of the valve Less Break Away Torque is granted Double antifriction washer "V" seals pack; 3 seals + o-ring It ensures a perfect tightness even after a high number of cycles Spring washer on the shaft seal Guarantee of the recovery of the gap due to the wear caused by the rotational movement of the shaft avoiding leakage towards the outside part. Less wear...
Open the catalog to page 3Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 4DIMENSION TABLE Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 5MATERIALS TABLE SPLIT BODY PN63-100 ANSI 600 carbon steel N° Descrizione Description A105 Carbon steel body LF2 Carbon steel body Body-connector gasket Stem lower sealing Chevron rings Stem o-ring Packing gland ring Carbon steel galvanized (x) (1) Carbon steel galvanized (x) (1) Springs washer Antistatic device Stud bolt Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 6Holder screw Holder screw Carbon steel galvanized (x) Carbon steel galvanized (x) Available on request: (*): A351 CF8M (**): For DN≤40x32 available only in CF8M (x): 304 s.s. (xx): 301 s.s. : for DN≤40x32 available only in DEVLON (1): for DN150x100 available only in 304 (.): Other materials available on request Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 7Shaft extension WELDED SPINDLE EXTENSION WITH LEVER MATERIALS TABLE PART. N° Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 8galvanized carbon steel (*) Holder Lever galvanized carbon steel (*) Holder screw (*): On request available in Aisi 304 s.s. (**): No available on valves with Iso connection F04 DIMENSIONS TABLE ISO NOTE: Code of the spindle extension depending from drive’s type and valve’s connection; to be requested at the order” SPINDLE EXTENSION FOR ACTUATORS Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 9NOTE: Dimensions depending from valve’s connection NOTE: Dimensions depending from actuator’s size MATERIALS TABLE PART. N° Prolunga Extension Bussola Bush O-RING O-RING NOTE: Code of the spindle extension depending from drive’s type and valve’s connection; to be requested at the order” Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 10Drives - bare shaft and lever CARBON STEEL BARE SHAFT (V__) AND LEVER (L__) OPERATED VALVE CODE size Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 11Drives - double acting pneumatic actuator ITEM CODES IN A105 CARBON STEEL BODY A105 Carbon steel BODY A105 Carbon steel ITEM CODES IN LF2 CARBON STEEL Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 12Drives - spring return pneumatic actuator Item codes in A105 CARBON Steel Item codes in LF2 CARBON Steel BODY LF2 Carbon steel Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 13Drives - electric actuators Item codes in A105 CARBON Steel Item codes in LF2 CARBON Steel BODY LF2 Carbon steel Be environmentally friendly...please don't print this document unless you really need to.
Open the catalog to page 14All OMAL Spa catalogs and technical brochures
-
MAGNUM & THOR
7 Pages
-
General Catalogue
592 Pages
-
"EA" ON-OFF rotary type
9 Pages
-
Special ends
21 Pages
-
Angle seat valves
33 Pages
-
ITEM 545
7 Pages
-
Pneumatic actuators
6 Pages
-
Heavy Duty spring return
65 Pages
-
Heavy Duty Double acting
29 Pages
-
Pro-Chemie 60
7 Pages
-
Trunnion ball valves Supreme
18 Pages
-
stainless steelANSI 900-1500
13 Pages
-
TFM1600 seats
1 Pages
-
Stainless steel ball valve
11 Pages
-
Hercules
10 Pages
-
Vip - Pneumatic axial valve
7 Pages
-
CONVERSION DA ? SR
4 Pages
-
CONVERSION SR ? DA
4 Pages
-
TRANSMISSION MECHANISM
6 Pages
-
OMAL ACTUATORS TESTING
4 Pages
-
TWO STAGE
2 Pages
-
ELECTRICAL ACTUATOR EA
6 Pages
-
ELECTRICAL ACTUATOR AE
6 Pages
-
DOUBLE ACTING "DA" AISI 316
2 Pages
-
DOUBLE ACTING "DA"
4 Pages
-
ART. 460-461
4 Pages
-
ART. 420
4 Pages
-
V415 ART. 415
4 Pages
-
ART. 400-401
4 Pages
-
ART. 216
4 Pages
-
ART. 160-161
4 Pages
-
ART. 153
4 Pages
-
ART. 116
4 Pages
-
ART. 113
4 Pages
-
ART. 101
4 Pages
-
ART. 100
4 Pages
-
Pneumatic axial valve
8 Pages
-
ARES WITH MANUAL DRIVE
2 Pages
Archived catalogs
-
CHEMICAL NICKEL
6 Pages
-
OMAL - General Catalogue (en,it)
274 Pages