Catalogs >
OMAL Spa >
3 way 4 seals stainless steel PN16-40 ANSI150

3 way 4 seals stainless steel PN16-40 ANSI150
13Pages

Catalog excerpts

3 way 4 seals stainless steel PN16-40 ANSI150 - 1

OMAL S.p.a. Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited: € 500.000,00 BALL VALVES Thor Split Body 3 way 4 seals stainless steel PN16-40 ANSI150 featu res featu res & benefits d imensions and materials shaft extension d rives Features Standard executions Floating ball, full bore Soft-seat seal TFM 1600 Standard for connecting flanges: EN1092-1, ASME B16.5 Pressure Class : ansi 150; PN16-40 Intercepted fluid: air, water, gas, petroleum and petrochemical products, aggressive fluids. Antistatic device EN12662-2 Stem seal: TFM1600 V-pack Additional seal on stem with FKM O-ring Anti Blow-out stem Actuator connection as per standard ISO 5211 Special executions on request For other flanges type please contact our sales department. Sealing in: PTFE reinforced with glass (RPTFE-GF), PTFE reinforced with carbon-graphite (RPTFE-CF). For other types of materials please contact our sales department. Stainless steel lever Stainless steel stem nuts and springs For special versions with materials (body/ball/stem) different from the standard please contact our sales department Certifications In compliance with European Directive 97/23 EC PED In complain with ATEX 94/9/CE Directive ( on request) Fugitive emission UNI EN ISO 15848 Ta-Luft VDI: 2440 Engineering standards Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 1

3 way 4 seals stainless steel PN16-40 ANSI150 - 2

Body thickness in compliance with: ASME B16.34, ASME VIII div.1, EN12516 Materials and rating in compliance with ASME B16.34 for ANSI valves and EN12516 for PN valves. Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 2

3 way 4 seals stainless steel PN16-40 ANSI150 - 3

Features & Benefits FEATURES & BENEFITS Antistatic device ((electrical continuity between ball, stem and 1 body) 2 Double antifriction washer Static electricity is avoided which can cause sparks and fire in an inflammable/explosive environment Contact safety throughout the entire life of the valve Less Break Away Torque is granted Less wear comparing with the execution with the single washer 3 "V" seals pack; 3 seals + o-ring It ensures a perfect tightness even after a high number of cycles 4 Spring washer on the shaft seal Guarantee of the recovery of the gap due to the wear caused by the...

Open the catalog to page 3

3 way 4 seals stainless steel PN16-40 ANSI150 - 4

Valves in carbon steel made with certified material - NACE as standard Greater corrosion resistance Greater ductility of the material Maximum control and accuracy in all the stages of the manufacturing process 100% in- house manufacturing process technology ATEX Certificate Installation is possible in a potential explosive environment TA LUFT fugitive emission Certificate High level of safety of the tightness towards the outside is granted Full compliance with European Safety Standards for Pressure Equipment Flexibility in supply quickly special executions requested by customers Be...

Open the catalog to page 4

3 way 4 seals stainless steel PN16-40 ANSI150 - 5

DIMENSIONS TABLE SIZE Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 5

3 way 4 seals stainless steel PN16-40 ANSI150 - 6

Note: for valves with T port, tye dimensions do not change F316 Stainless steel body Stem lower sealing Chevron rings Stem O-ring Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 6

3 way 4 seals stainless steel PN16-40 ANSI150 - 7

Packing gland ring Stem springs Body-Connector gasket Stud bolt Antistatic device Holder screw Holder screw Zinc coated carbon steel (x) Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 7

3 way 4 seals stainless steel PN16-40 ANSI150 - 8

Shaft extension WELDED SPINDLE EXTENSION WITH LEVER MATERIALS TABLE A Be environmentally friendly...please don't print this document unless you really need to. 8/13

Open the catalog to page 8

3 way 4 seals stainless steel PN16-40 ANSI150 - 9

galvanized carbon steel (*) Holder Lever galvanized carbon steel (*) Holder screw (*): On request available in Aisi 304 s.s. (**): No available on valves with Iso connection F04 DIMENSIONS TABLE ISO NOTE: Code of the spindle extension depending from drive’s type and valve’s connection; to be requested at the order” SPINDLE EXTENSION FOR ACTUATORS Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 9

3 way 4 seals stainless steel PN16-40 ANSI150 - 10

NOTE: Dimensions depending from valve’s connection NOTE: Dimensions depending from actuator’s size MATERIALS TABLE PART. N° Prolunga Extension Bussola Bush Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 10

3 way 4 seals stainless steel PN16-40 ANSI150 - 11

O-RING O-RING NOTE: Code of the spindle extension depending from drive’s type and valve’s connection; to be requested at the order” Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 11

3 way 4 seals stainless steel PN16-40 ANSI150 - 12

Drives - bare shaft and lever "L" Ball STAINLESS STEEL BARE SHAFT (V__) AND LEVER (L__) OPERATED VALVE CODE size "T" Ball STAINLESS STEEL BARE SHAFT (V__) AND LEVER (L__) OPERATED VALVE CODE size Be environmentally friendly...please don't print this document unless you really need to.

Open the catalog to page 12