Technical Specifications Summary

Machine Dimensions and Capacities

• Grindable bore diameter ranges from 0.02 mm to 3,000 mm.
• Grindable hole length up to 8/28/15 mm (likely a date or version, clarification needed).
• Swing over table: 400 mm; swing within chuck cover: 350 mm.
• Work length capacity: 1,900 mm.
• Work mass x length: 2,050 x 2,100 kg x mm.
• Machine height and floor space: 2,050 mm height; floor space 2,050 mm x 2,100 mm.
• Machine mass approximately 3,600 kg.

Travel and Feed Parameters

• Travel distances: unspecified in some cases, but table (Z-axis) travel is 350 mm.
• Feedrate ranges from 0.18 to 2 mm/min for some axes; rapid traverse up to 40 mm/min.
• Minimum unit precision: 0.0001 mm.
• Table oscillation amount: 10 mm; frequency: up to 585 times/min.

Spindle and Motor Specifications

• Spindle nose diameter: 70 mm.
• Spindle bore: 40 mm.
• Spindle speed range: 100 to 30,000 min⁻¹.
• Internal grinder wheel power: 5.5 kW (with 2 options).
• Workhead motor power: 3.5 kW.
• Cross slide (X-axis) motor power: 2.9 kW.
• Table (Z-axis) motor power: 2.8 kW.
• Hydraulic lube pump power: 0.4 to 4 kW-P.
• Coolant pump power: 0.25 to 2 kW-P.
• ID spindle cooling pump power: 0.18 to 2 kW-P.

Fluid Capacities

• Hydraulic lube capacity: 200 L.
• Coolant capacity: unspecified but indicated.
• ID spindle cooling fluid capacity: unspecified but indicated.

Additional Features and Kits

• SHK: High frequency internal grinding spindle kit available.
• SBK: Belt driving internal grinding spindle kit available.
• Table oscillation and spindle options support precision grinding tasks.

Summary of Key Parameters

Note: Some values appear ambiguous or incomplete (e.g., "8/28/15"), which may require clarification from the original source.