OKS 479 High-Temperature Grease, for Food Processing Technology Description OKS 479 is a fully synthetic grease for food processing technology that is used to lubricate rolling and friction bearings as well as other machine elements under increased operating temperatures. Applications • Lubrication of rolling and friction bearings, joints, linear drives, guides • For the lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Branches • Catering equipment and food processing technology • Chemical industry • Plant and machine (tool) engineering • Paper and packaging industry . Glass and foundry industry • Iron and steel industry • Rail vehicle technology . Shipbuilding and marine technology • Rubber and plastic processing • Municipal services Application tipsAdvantages and benefits • NSF H1 registered • Can be used universally due to good high-temperature properties, long-term lubricating effect and good adhesive strength on metal surfaces • Resistant to hot and cold water, water vapour, watery-alkaline and acidic disinfectants and cleaning agents • High resistance to oxidation and ageing Clean the lubricating points well for optimal effect. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value below 50,000) and their housings should be filled completely. In as far as available, the bearing and machine manufacturer's instructions should be observed. Subsequent lubrication at the lubrication nipples by grease gun or by automatic lubrication system. Assess the lubrication frequency and quantity on the basis of the service conditions. If old grease cannot be removed, restrict the quantity of grease so as to avoid over-lubricating the bearing. If lubrication frequencies tend to be low, you should aim for a full grease change. Caution: Only mix with suitable lubricants. 10.05.2026, En | Page 1/2 © Kluber Lubrication Munchen GmbH & Co

OKS 479 High-Temperature Grease, for Food Processing TechnologyPackaging • 400 ml Cartridge • 5 kg Hobbock Technical data The data in this document is based on our general experience and knowledge at the time of publication and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary field tests with the product selected for a specific application. All data are guide values which depend on the lubricant's composition, the intended...