PRODUCT INFORMATIONOKS 3710 Low-Temperature Oil, for Food Processing Technology Description Fuly synthetic oil for food processing technology that can also be used at extremyl low temperatures to -60°C. • Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. • Chain lubrication at arctic temperatures • Catering equipment and food processing technology • Shipbuilding and marine technology • Chemical industry • Iron and steel industry • Plant and machine (tool) engineering • Municipal services • Glass and foundry industry • Rail vehicle technology • Rubber and plastic processing • Paper and packaging industry • Excellent low-temperature behaviour . Good ageing and oxidation stability through optimal additives • Cold and hot water resistant • Resistant to water steam, as well as disinfectants and cleaning agents • Long economic operating times • Also available as spray version OKS 3711 Clean the lubricating point thoroughly for optimal effect. Apply a sufficient amount of OKS 3710 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. • 5 l Canister • 25 l Canister • 200 l Drum 10.05.2026, En | Page 1/2 © Kluber Lubrication Munc

PRODUCT INFORMATIONOKS 3710 Low-Temperature Oil, for Food Processing Technology Technical data Kluber Lubrication Munchen GmbH & Co. KG The data in this document is based on our general experience and knowledge at the time of publication and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary field tests with the product selected for a specific application. All data are guide values which depend on the lubricant's composition,...