1. Catalogs
  2. OKS Spezialschmierstoffe GmbH
  3. intelligent additive technology

intelligent additive technology

intelligent additive technology

intelligent additive technology

Product catalog summary
Overview: The document discusses the benefits of OKS Speciality Lubricants enhanced with Mox-Active additive technology. These lubricants are designed to reduce friction and wear, increase operational safety, improve quality, relieve environmental impact, and save costs.
Specifications: All OKS products with Mox-Active contain organic molybdenum complex compounds. The technology focuses on surface management by forming a pressure-resistant lubricating protective film on metal surfaces.
Procedures: The Mox-Active technology works in three phases:
  • Phase 1: Immediate deposition on metal surfaces to form a protective film.
  • Phase 2: Increased load capacity with reduced friction and wear.
  • Phase 3: Accelerated plastic leveling of metal surfaces, achieving low friction and high wear protection, especially when combined with MoS2.
Performance and Testing: The Lubrimeter test shows significant improvements with Mox-Active:
  • Operating temperature drops from +120°C to +80°C.
  • Friction value decreases from 0.09 to 0.03.
  • Surface roughness reduced by 20% and wear by 14%.
These results indicate lower energy consumption, better force transmission, and extended machine element life.
Environmental and Cost Benefits: Mox-Active lubricants reduce operating costs and environmental impact by lowering lubricant and energy consumption. They also extend lubricant life and relubrication intervals, leading to reduced maintenance and spare part costs.
Disclaimer: The document states that the information provided is based on current technology and testing but should be considered as recommendations. Liability is limited to specific written agreements.
Contact Information: For further inquiries, OKS Spezialschmierstoffe GmbH can be contacted via phone, fax, or email.
See more

Catalog excerpts

intelligent additive technology-1

Increased performance through □ Reducing friction and wear □ Increasing operational safety □ Relieving environment □ R aving costs * All OKS products with Mox-Active additive technology contain organic molybdenum complex compounds for higher performance. Speciality Lubricants Maintenance Products

 Open the catalog to page 1
intelligent additive technology-2

Wirkung auf die Oberfläche OKS Spezialschmierstoffe mit Mox-Active übernehmen das Oberflächen-Management an den Metalloberflächen The surface management der 25.03.2003 Additive unterstützen und beschleunigen dabei Intelligente 17:46 Uhr Seite 17 Mox-Active OKS Speciality Lubricants take over the surface management Mox-Active OKS Speciality Lubricants reduce the operating costs and die Fließeinglättung der sonst lubrication. on the metal surfaces of the points of rauhen Oberflächen und increase the quality in manufacture. Mox-Active OKS Speciality Lubri- Intelligent additives support and accelerate...

 Open the catalog to page 2

All OKS Spezialschmierstoffe GmbH catalogs and technical brochures

  1. OKS 2670

    2  Pages

  2. OKS 2611

    2  Pages

  3. OKS 601

    2  Pages

  4. OKS 471

    2  Pages

  5. OKS 2200

    2  Pages

  6. OKS 480

    2  Pages

  7. OKS 479

    2  Pages

  8. OKS 2631

    2  Pages

  9. OKS 3570

    2  Pages

  10. OKS 3710

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.