The Only Original Wedge-clamp

COMPANY PROFILE Founded in 1984, OK-VISE Oy is located in the beautiful lake district of Central Finland, in the Muurame Business Park, a center of the megatronics industry in the northern European Union. The OK-VISE low-profile clamp was originally designed to solve a specific workholding need in the flowmeter production process of our parent company. This clamping method attracted the interest of other companies due to the obvious benefits it offers, such as the possibility of three-directional machining, extreme clamping force, and ultimate efficiency. Our products are available through a...

A CORE COMPONENT OF ANY MODERN WORKHOLDING SYSTEM OK-VISE low-profile clamps adapt optimally to any system. They fit into grid pattern systems, T-slot tables, serrated rails, and many other platforms. Additionally, the most economical fixtures can be built by using OK-VISE low-profile clamps on machinable plates. OK-Vise clamps are suitable for three-directional machining, 5-axis machining, and many other modern machining methods. When you need fixtures for any modern machining application, OK-VISE clamps are your best choice. ABSOLUTE STABILITY The key feature of the OK-VISE low-profile clamp...

General-purpose clamp for your workshop. Serration creates high friction, which ensures reliable clamping in any circumstances. When no marks on the workpieces are allowed, smooth jaws are used. In addition to holding the workpiece in place, pull-down clamps also generate pull-down action, pressing workpieces down onto the fixture base. MACHINABLE JAWS Single-wedge clamps are also available with extended jaws and can be machined to suit the geometry of the workpiece. The smallest model can be machined up to 3 mm and the larger ones up to 5 mm. ADDITIONAL PIECE MODELS Additional piece models have...

DK2-VTI measures given in inches and ounces.

DK2-VTI-S measures given in inches and ounces. STAINLESS STEEL MODEL Type

DK2-VTI+5 measures given in inches and ounces. DK2-VT+5 / DK2-VTI+5 Socket Head Screw DIN 912 Pressing force of Jaws, kN Tightening torque, Nm FK2-VT+5 Combo Model: Machinable & Smooth jaw DK2-VTI+5S measures given in inches and ounces.

ADDITIONAL PIECE MODEL Type DK2-VTI-T measures given in inches and ounces.

Bolt not includedBK2-VT-PD DK2-VTI-PD measures given in inches and ounces. Socket Head Screw DIN 912 Pressing force of Jaws, kN Tightening torque, Nm DK2-VT-PD / DK2-VTI-PD Socket Head Screw DIN 912

DK2-WTI measures given in inches and ounces. Socket Head Screw DIN 912 Pressing force of Jaws, kN Tightening torque, Nm

ECONOMY SERIES The cost efficient choice! These models meet the demands of workholding when ultra precision and high clamping force are not necessary. They are made of the same raw material as our other models, and the bottom of the jaws are ground for precise positioning on the fixture base. AK2-VT-SO always comes with Viton o-rings.

SIZE A B D D F Horizontal forces of OK-Vise low profile clamps

O K -vise fi x t u r ing concept APPLICATIONS Hydraulic applications T-slot applications

O K -vise fi x t u r ing concept APPLICATIONS Combo-Rail applications Grid applications Blank plate applications

O K - V I S E f ixtu rin g co n cept All platforms, all workpieces Generic Fixturing Components Components For Dedicated Fixturing Blank Fixturing System Low-Profile Clamps Multi-Rail RH System Grid Fixturing System The original OK-VISE low-profile clamps are known world- The mother company of OK-VISE OY is Kytola Instruments. wide as a core component of any modern workholding sys- The company is known for manufacturing precision instruments. tem. In the machining industry, OK-VISE name means quality. OK-Vise Oy, P.O.Box 5 40951 Muurame, Finland Tel. +358 20 7790 699, Fax +358 14 631 419 Technical...