video corpo

OK-VISE Fixturing concept
17Pages

{{requestButtons}}

Catalog excerpts

OK-VISE Fixturing concept - 1

BASED ON CLAMPING METHOD All Platforms, All Workpieces Small in Size – Giant in Performance

Open the catalog to page 1
OK-VISE Fixturing concept - 2

WORKHOLDING TODAY When productivity needs to COMPANY PROFILE OK-VISE FIXTURING CONCEPT In the late 1970s Finnish entrepreneur and inventor Olli Kytölä ( “ok” ) bought The OK-VISE Fixturing Concept features a range of components that are suit- his first numerically controlled machining centers, but he was not happy with able for clamping different workpiece types, sizes and materials on all types of the workholding solutions that were available then. workholding platforms and machining centers. improve, we recommend focusing to study the screw anchor that he was using - the rest is part of...

Open the catalog to page 2
OK-VISE Fixturing concept - 3

LOW-PROFILE CLAMPS OK-VISE CLAMP ACTUATION The OK-VISE clamping method is both an effective and time-saving solution Low-profile clamps can be actuated either manually ( picture ) or automatically. because it allows full utilization of the fixturing platform. It also allows free On both sides of the clamp a stop module ( or similar functionality ) is needed. tool access to the workpiece, is free of play and possesses extreme clamping With this setup, one or two workpieces can be clamped using one clamp, force in a small space. simply the place of the stopper module accordingly. Efficient...

Open the catalog to page 3
OK-VISE Fixturing concept - 4

TUNGSTEN CARBIDE COATING ( -D ) FORM JAWS When no marks on the workpieces General-purpose clamp for your work- Offers the same friction as a standard All these jaw types can be combined To make a form closure for the workpiece we can also machine various types of are allowed, smooth jaws are used. shop. Serration creates high friction, serrated jaw but leaves less visual with each other into a clamp or stop special jaws. These jaws have V-slots to clamp disks and rods. The can be “hori- which ensures reliable clamping in any marks on the workpiece. Industrial module. In most cases both jaws...

Open the catalog to page 4
OK-VISE Fixturing concept - 5

A CORE COMPONENT OF ANY MODERN WORKHOLDING SYSTEM The OK-VISE low-profile clamp is also the core of OK-VISE FIXTURING CONCEPT. Low-profile clamps adapt optimally to any workholding platform. They fit into grid pattern systems, T-slot tables, serrated rails and many other platforms. OK-VISE clamps are suitable for three-directional machining, 5-axis machining and many other modern machining methods. When fixtures are needed for any modern machining application, OK-VISE clamps and OK-VISE FIXTURING CONCEPT are your best choice. SMALL IN SIZE - GIANT IN PERFORMANCE FULL 10 YEAR WARRANTY...

Open the catalog to page 5
OK-VISE Fixturing concept - 6

GENERIC-PURPOSE COMPONENTS VS. DEDICATED FIXTURING Our Blank system is a system for building DEDICATED FIXTURING (workpiece-specific fixturing). Normally only one setup of one workpiece can be clamped with these In most cases machining a workpiece requires more than one fixture. The fixture for a specific workpiece and a specific machining operaBlank Fixturing sysytem PAGE 24 A dedicated fixture is workpiece-specific, whereas a system built of generic-purpose components can be set up for a variety of workpieces. FIXTURE BUILT FROM GENERIC-PURPOSE FIXTURING COMPONENTS • Modular system •...

Open the catalog to page 6
OK-VISE Fixturing concept - 7

OK-VISE MULTI-RAIL RM OK-VISE MULTI-RAIL RM System is the best-selling generic purpose system of OK-VISE. Compared to a traditional machine vise, the Multi-Rail system offers the following benefits: • Using the components of the system, even the most challenging workpiece types can be machined • All sides of a workpiece can be machined with two setups • Multiple workpieces can be clamped simultaneously • Workpiece will be safely fixtured in all conditions • It is also possible to clamp very large workpieces • Multi-Rail RM system modules are the most accurate multiple clamping modules on...

Open the catalog to page 7
OK-VISE Fixturing concept - 8

multi-rail base multi-rail base stop module smooth stop module smooth clamp module D smooth clamp module smooth multi-rail base stop module smooth clamp module smooth multi-rail base stop module smooth clamp module D smooth multi-rail base To hold large workpieces parallel block OK-VISE FIXTURING CONCEPT • Multi-Rail RM SRM-Z107 Multi-Rail RM • OK-VISE FIXTURING CONCEPT

Open the catalog to page 8
OK-VISE Fixturing concept - 9

TIPS TO CHOOSE SUITABLE MODULES We also offer installation sets for the most common platforms like T-slot tables and grid systems. Spigot installations to all leading zero-point systems – including OK-LOCK System – are available. Choose suitable length that allows enough space for workpieces, stoppers and clamps. Please also take your future needs into account Stoppers and clamps For first operation, especially when clamping is done on a rough surface like sawn or flame-cut surfaces, serrated jaws are needed. When no marks are allowed on the workpiece - for example when clamping is done on...

Open the catalog to page 9
OK-VISE Fixturing concept - 10

OK-VISE MULTI-RAIL RH SYSTEM Multi-Rail RH system is designed for heavy duty applications. When more than 6 tons clamping force is required or only M16 bolts can be used for installation, then our RH system can be considered instead of RM. FIXTURE SETS The OK-VISE team has created some basic sets to enable an easy start with the Multi-Rail system. Compared to a traditional machine vise, the Multi-Rail RH system offers the following benefits: • Using the components of the system, even the most challenging workpiece types can be machined. • All sides of a workpiece can be machined with two...

Open the catalog to page 10
OK-VISE Fixturing concept - 11

OK-VISE COMBO-RAIL Our patented Combo-Rail unit is optimized for applications that require work The Combo-Rail units can be combined with most OK-VISE Fixturing Concept support in floating mode, which means that once positioned, the unit clamps components. In particular, combining Combo-Rail units with OK-VISE Multi- the workpiece in place without moving it. This is used when the workpiece is Rail has been proven to be a brilliant combination. Special versions are also positioned by other means and bending of the workpiece at the support point available, please do not hesitate to ask for...

Open the catalog to page 11
OK-VISE Fixturing concept - 12

GRID FIXTURING SYSTEM One more generic-purpose system that is available is the Grid System. Most of the modules are 25 mm high and have integrated parallels, making them some basic sets to enable an easy start with the Grid system. In the pictures optimal for clamping complex workpiece forms like plates. GRID SYSTEM To make selection of the components easier, the OK-VISE team has selected below you can see the solutions created with each set. We recommend plat- The module interface is optimized for grid platform ( 12 mm positioning bush- forms of leading suppliers. The grid plate is...

Open the catalog to page 12

All OK-VISE catalogs and technical brochures

  1. Tooling Blocks

    24 Pages

  2. Combo-rail

    4 Pages

  3. Grid System

    4 Pages

  4. Blank System

    6 Pages

Archived catalogs