Oiles 500SP1 ……………………………………… Oiles 500SP4 ……………………………………… Oiles 500SPR ……………………………………… Oiles 500SP5 ……………………………………… Oiles 500HP ……………………………………… Oiles 500AB ……………………………………… Oiles 500B ………………………………………… Oiles 500F ………………………………………… Oiles 500 Spherical Bearings ………………… Oiles 2000 ………………………………………… Oiles Shoe Units ………………………………… Oiles 2000S ……………………………………… Oiles Cermet M …………………………………… Oiles

High-strength brass bearings with embedded solid lubricant Test data • Serviceable without the need for lubrication. • Demonstrates high performance under high-load and low-speed operations. • Demonstrates superior wear resistance in applications where oil film is seldom produced such as reciprocating motions, oscillation, frequent starts and stops, etc. • Superior chemical resistance and corrosion resistance. • Standard products are available in various sizes. Journal rotation test 500spi-sli <Testing conditions> Mating material : S45C high frequency quenched Test time:lOOh Ambience : in the...

Technical Product Corporate Profile Information Slide Shifter Air Bearings Multi-layer Bearing Plastic Bearing Information Selection Guide All SPB bushings have engraved <3K& mark. Mating shaft e7: For general (Low-load) f7: For high accuracy • Applicable to rotation, oscillation, and reciprocating motion. • Do not use this under water. • 31.5mm I.D bushing can be used as an intermediate trunnion bushing for hydraulic cylinders. ^The I.D. tolerance after press fitting is for reference only. MD. 05O~02OO are shown on pages 189 to 190. Product Technical Selection Guide Information Plastic Bearing...

Technical Product Corporate Profile Information Slide Shifter Air Bearings Multi-layer Bearing Plastic Bearing Information Selection Guide All SPB bushings have engraved mark. snings 809670 Part No.Mating shaft 5Q~0 2 Bushing Housing •Applicable to rotation, oscillation, and reciprocating motion. • Do not use this under water. • 63mm I.D bushing can be used as an intermediate trunnion bushing for hydraulic cylinders. ^Part No. with * are custom-made. ^The I.D. tolerance after press fitting is for reference only. MD. 06~045 are shown on pages 187 to 188. ^Be sure to determine the position with...

Technical Product Corporate Profile Information Slide Shifter Air Bearings Multi-layer Bearing Plastic Bearing Information Selection Guide es 500SP1 SL4 Bushings General * Underwater SPBL Mating shaft d8: For general b9: For high-load and underwater use ^Operating Temperature Range: —40—P80°C (—40—F176°F) Solid Lubricant : SL464 (refer to page 34) •Applicable to rotational, oscillating, and reciprocating motion. • Be sure to apply grease supplied with the product to the inner sliding surface before assembling the bearing. Run in the bearing. • May be used over the maximum allowable speed or maximum...

Technical Product Corporate Profile Information Slide Shifter Air Bearings Multi-layer Bearing Plastic Bearing Information Selection Guide Flange bushing Housing Shaft d8: For general (high-load) e7: For general (low-load) f7: For high accuracy g6: For high accuracy (intermittent operation) • Applicable to rotational, oscillating, and reciprocating motion. • Flange surface is not subject to a thrust load as no lubricant is embedded. • Do not use this under water. • 31.5mm I.D. and 63mm I.D bushing can be used as an intermediate trunnion bushing for hydraulic cylinders. a: Chamfering for under...

Technical Product Corporate Profile Information Slide Shifter Air Bearings Multi-layer Bearing Plastic Bearing Information Selection Guide SPFG gs 3525 Part No. Motion Mating shaft Flange bushing d8: For general (high-load) e7: For general (low-load) f7: For high accuracy g6: For high accuracy (intermittent operation) • Applicable to rotational, oscillating, and reciprocating motion. • This bushing can be subject to both radial-journal and thrust load. • Improve machining by more accurate flange thickness. Product Technical Selection Guide Information Plastic Bearing Multi-layer Bearing Air Bearings...

Technical Product Corporate Profile Information Slide Shifter Air Bearings Multi-layer Bearing Plastic Bearing Information Selection Guide SPW shers • May be combined with the SPB. • See the description of the SPB for combination. (Pages 187 to 190) • The products with the N marks at the end of the part numbers have no mounting holes. 3005 Part No. Countersink type b C1 Product Technical Selection Guide Information Plastic Bearing Multi-layer Bearing Air Bearings Slide Shifter Information Corporate Profile