Polyphenylene sulfite bearings with fillers Bearings with superior heat resistance, chemical resistance, and serviceable in high-speed conditions • Has superior wear resistance. Demonstrates outstanding resistance against abrasive wear caused by dust and coarse mating surface, in particular. • Has rubber elasticity and flexibility, superior impact resistance, and large vibration-proof and noise suppressing effects. • Has superior cold resistance, weather resistance and ozone resistance. • Injection-molded and can be made in complicated shapes. OILES 50 P1000 series (Adipate Type Polyurethane Elastomer) Mechanical properties >SThe values shown above are typical values, not the standard values. • It conforms to the positive list system of the food sanitation act in Japan. • It conforms to the positive list system of the food and drug administration (FDA) in United states. • It has superior chemical resistance and can be used in environments where disinfection is performed. (It is also resistant to disinfection with sodium hypochlorite.) • It can be used in the temperature range up to 200°. • Injection-molded and can be made in complicated shapes. Has good mass productivity. >SThe values shown above are typical values, not the standard values. Journal rotation test <Testing conditions> Meting material : SUJ2 Environment : In atmospheric air Pressure : 0.98N/mm2 Velocity : 0.33m/s Test time : 100h Lubrication : dry OILES 50 P5000D series (Caprolactone Type Polyurethane Elastomer) Mechanical properties >SThe values shown above are typical values, not the standard values. (Note) hardness : JIS K 7215durometer hardness HDA-type A durometer hardness HDD-type D durometer hardness