Oiles Fiberflon GH Polyester bearings with fillers Test data Journal oscillation test Feature • This product can be used in air, water or seawater. • Demonstrates superior wear resistance under micro-motion. • Easy dimensional setting due to a low swelling rate. • Lighter weight than metallic bearings, and easier assembly even with large diameter units. • Also available in large diameters and plate shapes. Service range Condition: in atmosphere, bushing, shaft rotation.The values in parentheses are static bearing pressures, which are the bearing pressures in applications with no motion or very small motion (^0.0017m/s). Mechanical p ^The values shown above are typical values, not the standard values. (Note 1) Measurements are taken in a direction parallel to the bearing layer. (Note 2) Measurements are taken in a direction perpendicular to the bearing layer. <Testing conditions> Environment : In atmospheric air, In water Oscillating cycle : 120cpm Test time : 100hr Lubrication : dry Journal oscillation test_ <Testing conditions> Environment : In water, In muddy water Bearing dimension : 060X075X150 Mating material : SUS403 Pressure : 24.5N/mm2 Velocity : 0.008m/s Oscillating angle : ±2° Oscillating cycle : 120cpm Test time : 50hr Lubrication : dry