Oiles Glitron SF
1Pages

Selection Guide Product Information Plastic Bearing Multi-layer Bearing Service temperature range ℃ JIS K 7311 ̶ 2 2 JIS K 7311 N/mm｛kgf/cm ｝ JIS K 7311 ％ JIS K 7311 N/mm ｛kgf/cm｝ JIS K 7206 ℃ Hardness （Note） Heat resistant temp. Characteristics Allowable max. velocity V m/s｛m/min｝ Mechanical proper ties g/cm3 Tensile strength Tensile elongation at break Flexural property Flexural modulus Izod impact strength ASTM D 256 Hardness Co-efficient of linear ASTM D 696 expansion Melting point ※The values shown above are typical values, not the standard values. Journal rotation test Wear amount 〔mm3 〕 0.5 Oiles Glitron SF Oiles Glitron SE OILES 50 P5000D series (Caprolactone Type Polyurethane Elastomer) Mechanical properties P5059D P5064D P5068D P5074D Specific gravitty Tensile strength Tensile elongtion at break Tear strength VICAT softening point JIS K 7311 ̶ 2 2 JIS K 7311 N/mm｛kgf/cm ｝ JIS K 7311 ％ JIS K 7311 N/mm ｛kgf/cm｝ JIS K 7206 ℃ Hardness （Note） Heat resistant temp. Characteristics HDA-type A durometer hardness HDD-type D durometer hardness ※The values shown above are typical values, not the standard values. Corporate Profile JIS K 7311 ̶ 2 2 JIS K 7311 N/mm｛kgf/cm ｝ JIS K 7311 ％ JIS K 7311 N/mm ｛kgf/cm｝ JIS K 7206 ℃ Hardness （Note） Heat resistant temp. Characteristics Technical Information Specific gravitty Tensile strength Tensile elongtion at break Tear strength VICAT softening point ※The values shown above are typical values, not the standard values. ＜Testing conditions＞ OILES 50 P5000 series (Caprolactone Type Polyurethane Elastomer) Mechanical properties P5085 P5090 P5095 P5098 Slide Shifter Technical Information Test data ※The values shown above are typical values, not the standard values. Specific gravity Metallic Bearing Specific gravitty Tensile strength Tensile elongtion at break Tear strength VICAT softening point Has superior wear resistance. Demonstrates outstanding resistance against abrasive wear caused by dust and coarse mating surface, in particular. Has rubber elasticity and flexibility, superior impact resistance, and large vibration-proof and noise suppressing effects. Has superior cold resistance, weather resistance and ozone resistance. Injection-molded and can be made in complicated shapes. OILES 50 P1000 series (Adipate Type Polyurethane Elastomer) Mechanical properties P1085 P1090 P1095 Service range Lubrication condition Multi-layer Bearing Metallic Bearing It has superior chemical resistance and can be used in environments where disinfection is performed. (It is also resistant to disinfection with sodium hypochlorite.) It can be used in the temperature range up to 200° C. Injection-molded and can be made in complicated shapes. Has good mass productivity. It conforms to the positive list system of the food sanitation act in Japan. It conforms to the positive list system of the food and drug administration (FDA) in United states. Plastic Bearing Corporate Profile Polyurethane bearings Bearings with superior heat r