TGHG Series Precision Current Sense Resistors The TGHG Series uses state of the art technology to provide highly reliable, non inductive performance. This resistor is ideal for many current monitoring and controls applications. • Resistance values beginning at 0.5mΩ • Non Inductive • Four terminal Kelvin connection • SOT 227 Package • Four terminals to isolate measurement path from current flow path • Accuracy in a high power package Terminal Nuts American standard 303 stainless steel 100 Percent Rated Power Standard Resistance Values 0.5mΩ-1Ω, others on request Temperature Coefficient referenced to 25°C, ∆R taken at -15°C and +105°C, <60ppm/°C; <500ppm/°C for resistance range 27mΩ-49mΩ) Power Rating 100W at 70°C case temperature; 150Amp permanent not to exceed Ohms Law power load. Heat Resistance Rth <0.56K/W Protection class acc. to IEC 950/CSA22.2 950/M -89 and EN 60950.88:2 Working Temp. Range -55°C to +155°C Max. Torque for Contacts 1.3Nm 8 (static) Dielectric strength 1000VDC, higher value on request Heat Sink Nickel-plated copper Best results can be reached by using a thermal transfer compound with a heat conductivity of better than 1W/mK Max Torque for Base Plate 1.5 Nm (static) THIS PRODUCT IS DESIGNED FOR USE WITH PROPER HEATSINKING. Maximum base plate temperature of the resistor must be monitored and kept within specified limits to establish the power rating. Best technique is to attach a thermocouple to the side of the base plate of the resistor. Temperature of plastic housing or heat sink cannot be used to establish rating of the resistor.

,5) 0.354" ±.004 (9mm ±.1) C = current connection (source) S = voltage connection (sense) Configuration C = current sense E = RoHS compliant i i TGH = series Wattage Resistance Value Tolerance G= 100W Example: D= 0.5% 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected]